Effect of Fe3O4 magnetic nanoparticle concentration on the signal of surface plasmon resonance (SPR) spectra has been successfully observed. The Fe3O4 nanoparticles with a particle size of about 10.5 ± 0.2 nm were used as active materials to increase the SPR response. X-ray diffraction (XRD) pattern showed that Fe3O4 nanoparticles have a high degree of crystallinity with spinel structure. The S...

A facile synthesis of rose-like Pd-Fe3O4 nanocomposites via controlled thermal decomposition of Fe(CO)5 and reduction of Pd(OAc)2, followed by the immobilization of Au nanoparticles (NPs) onto the Pd-Fe3O4 supports, is reported. The morphology of these hybrid nanostructures could be easily controlled by varying the amount of Fe(CO)5 and the reaction temperature. Moreover, the synthesized Au/Pd-...

The study determined the effect of intravenous administration of acutely toxic or sub-lethal doses of Na-oleate-coated Fe3O4 (OC-Fe3O4) nanoparticles (NPs) on liver structure and function in Wistar rats, compared to titanium dioxide (TiO2) NPs and saline-injected controls. The acute study, using a modified OECD 425 progressive dosing procedure, found LD50 values of 59.22 and 36.42 mg/kg for TiO...

The presence of elevated concentration of arsenic in water sources is considered to be health hazard globally. Calcination process is known to change the surface efficacy of the adsorbent. In current study, five adsorbent composites: uncalcined and calcined Fe3O4-HBC prepared at different temperatures (400°C and 1000°C) and environment (air and nitrogen) were investigated for the adsorptive rem...

A chemoselective route to induce Fe3O4@ZnO core-shell nanoparticles decorating carbon nanotubes to form MWCNT/Fe3O4@ZnO heterotrimers has been developed. Charges are redistributed in the heterotrimers through C-O-Zn, C-O-Fe and Fe-O-Zn bondings, giving rise to multiple electronic phases. The generated significant interfacial polarization and synergetic interaction between dielectric and magneti...

Atomic interdiffusion between FePt and Fe3O4 nanoparticles in annealed FePt-based nanocomposite magnets has been studied by means of structural and magnetic characterizations. The results show that the Fe3Pt phase is formed during the annealing only when the mass ratio x of Fe3O4/FePt is larger than 1/20. When x 1/20, only FePt single phase is formed. It is interesting to find that the coercivi...

Magnetic tunnel junctions with an Fe3O4 top electrode have been fabricated. High resolution transmission electron microscopy (HRTEM) shows that in as-deposited state, Fe and FeO phases exist at the interface. These two phases are believed to have formed as a result of the unstable plasma condition at the start of the Fe3O4 deposition. A relatively low magnetoresistance ratio (MR) (3.5%) and low...

ω-Transaminase (ω-TA) as a kind of important biocatalyst is widely used in preparation of chiral intermediates. In this paper, a magnetic PVA-Fe3O4 nanoparticles was prepared and employed on immobilization of ω-TA to reduce the cost, increase reusability and enhance stability. The prepared magnetic PVA-Fe3O4 nanoparticles were characterized by transmission electron microscope (TEM), X-ray diffr...

The application of anion-exchange resins (AERs) is limited by fouling, which increases the fresh resin dosage, regeneration frequency, and amount of regeneration effluent. In this study, five AERs with different Fe3O4 amounts was prepared by increasing the amount of Fe3O4 added to 100 g of monomer mixture for suspension polymerization from 0 g to 40 g. Results showed considerably improved pore ...

Particular N, S co-doped graphene/Fe3O4 hybrids have been successfully synthesized by the combination of a simple hydrothermal process and a subsequent carbonization heat treatment. The nanostructures exhibit a unique composite architecture, with uniformly dispersed Fe3O4 nanoparticles and N, S co-doped graphene encapsulant. The particular porous characteristics with many meso/micro holes/pores...