Five experiments were conducted to determine the effect of fat addition to dry-rolled corn (DRC) finishing diets on subacute acidosis. In Exp. 1, five ruminally fistulated steers (410 +/- 12 kg BW) were used in a 5 x 5 Latin square design. Treatments consisted of 0, 2, 4, 6, or 8% tallow added to a 50% fine-ground corn: 50% dry-rolled wheat basal challenge diet and dosed intraruminally as an ac...

There is no wear and no friction with non-contacting sealing systems. Because of this, there is in principle no lifetime-limit. However, this does not apply for grease-filled labyrinth seals. To seal against particles, the grease inside the gaps of the seal has to bind pollution particles and the grease-filled gap must be opened. If the surfaces of the grease layers in the gaps are saturated wi...

The authors have previously proposed and tested a method for increasing the wear resistance of heavy-loaded friction pairs by saturating industrial lubricants with metallic nanopowder pair’s component that has lower hardness. To confirm effectiveness this concept, paper presents results experimental investigations into tribological characteristics two medium carbon steels (rail steel K74 struct...

Lubricating greases are special lubricants with a wide range of application. The tribologically stressed grease is used as tribological system and finally modeled as an open thermodynamic system. This study investigated the phenomenon of self-optimization and applied to the process of shearing a grease. The conditions for self-optimization and the consequences of created dissipative structures ...

The wide spread of food outlets has become an environmental and sanitation infrastructure problem, due to Fats, Oils and Grease (FOG). A grease box is used at the industrials facilities to collect the FOG, in a specific time window, while its quality is good for recycling (e.g., biodiesel) and it is economically valuable. After this period, it will be disposed at a cost. For the proper manageme...

Ionic liquids are salts, many of which are typically viscous fluids at room temperature. The fluids are characterized by negligible vapor pressures under ambient conditions. These properties have led us to study the effectiveness of ionic liquids containing both organic cations and anions for use as space lubricants. In the previous paper we have measured the vapor pressure and some tribologica...

Tribological conditions can change drastically during heavy loaded regimes as experienced in metal forming; this is especially critical when lubrication can only be applied at the early stage of the process because the homogeneous lubricant layer can break along the die-workpiece interface. In these cases, adopting a constant friction factor for the lubricant-surface pair may not be a valid ass...

Increased machine efficiency is a requirement in today’s world and geared transmissions are no exception. A back-toback gear test rig was used to compare dip lubrication with spray lubrication regarding gearbox efficiency, mesh efficiency, gear temperature and surface roughness. Gears lubricated at the inlet of the mesh show a lower measured temperature when compared to spray lubrication at the...