fiber metal laminates are hybrid laminates consisting of thin alternating bonded layers of aluminum and fiber/epoxy. arall (aramid aluminum laminate) and galare (glass fiber reinforced aluminum laminate) are specific kinds of fiber metal laminates that consist of thin aluminum sheets along with kevlar/epoxy and glass/epoxy composite layers, respectively. in this study, nonlinear tensile behavio...

Grinded glass fiber (GGF) embedded high density polyethylene (HDPE) membranes were prepared via thermally induced phase separation method. FESEM images showed that all the membranes had leafy structure, indicating a solid-liquid mechanism during phase separation. The results of EDX and TGA analyses confirmed that the fibers were dispersed in the HDPE matrix uniformly. Normalized water flux of t...

This study evaluated the effect of macro steel fiber (SF), micro glass fiber (GF) and micro polypropylene fiber (PF) in lightweight aggregate concrete, (LWAC) beams reinforced with glass fiber reinforced polymer (GFRP) bars. Firstly, concrete mixtures with different volume fractions of GF, PF and SF were tested up to compressive strength, then determine the optimum fiber content GF, PF and SF a...

AIMS The aim was to evaluate the incidence of root fracture of endodontically treated teeth reinforced with glass-fiber posts and metal posts luted with different luting cements. MATERIALS AND METHODS Forty maxillary central incisors were sectioned at 1 mm of the cementoenamel junction and endodontically treated. The teeth were divided into four groups (n = 10) and restored with prefabricated...

We have shown previously that asbestos and other mineral dusts, including glass fibers, induce cell transformation and chromosomal mutations in Syrian hamster embryo cells in culture. In the present study, we observed that both asbestos and glass fibers were phagocytized by these cells and accumulated in the perinuclear region of the cytoplasm. In order to understand the mechanism of fiber leng...

Birefringence of oxide glass fibers drawn from glass melts through an orifice has been detected previously [H. Stockhorst, R. BruÈckner, J. Non-Cryst. Solids 49 (1982) 471; H. Stockhorst, R. BruÈckner, J. Non-Cryst. Solids, 86 (1985) 105.] This birefringence is a measure of anisotropy in glass structure that can influence fiber performance properties. Birefringence is produced during fiber draw...

BACKGROUND Glass and quartz fiber posts are used in restoration of structurally compromised roots. Accessory fiber posts are recently introduced to enhance the fiber post adaptation. This study evaluated the effectiveness of glass versus quartz accessory fiber posts. MATERIALS AND METHODS In this experimental study, 40 mandibular premolar roots with similar dimension (radius of 3.5 ± 0.2 mm a...

We demonstrate a 1.5-microm - wavelength fiber laser formed by placement of glass microsphere resonators along a fiber taper. The fiber taper serves the dual purpose of transporting optical pump power into the spheres and extracting the resulting laser emission. A highly doped erbium:ytterbium phosphate glass was used to form microsphere resonant cavities with large gain at 1.5microm . Laser th...

Industrial case studies of successful implementations of combined mechanical and closed-loop control design provide students with meaningful examples of classroom theory. Such a case study on the development of a capstan drive with feedback control for use in optical fiber production is presented in this paper. Optical fiber is manufactured by the draw process, heating and pulling high purity g...

STATEMENT OF THE PROBLEM Sufficient adhesion between silorane/methacrylate-based composites and methacrylate impregnated glass fiber increases the benefits of fibers and enhances the mechanical and clinical performance of both composites. PURPOSE The aim of this study was to evaluate the compatibility of silorane and methacrylate-based composites with pre-impregnated glass fiber by using flex...