nanocomposites based on phenolic resol and novolac resins and cloisite 30b were prepared. different kinds of phenolic resins and clay content were studied with respect to the morphology and mechanical properties of the polymer silicate layers. the phenolic resins, namely resol, novolac and their mixture and four different percentages of clay contents, 0.5, 1, 2 and 5 wt% have been considered. x...

aisi 4340 steel is one of the super strong steels that can be selected for different applications. by designing theproper cycles of heat treatment, the optimum microstructure and properties of this steel can be achieved. in thisstudy, different heat treatment cycles were introduced to achieve the optimum microstructure and improve themechanical and magnetic properties of aisi 4340 steel. the re...

medium density fiberboard (mdf) was produced using moist depithed bagasse stored dry or wet. the duration of storage for either method varied between 0 to 4 months. two steaming temperatures of 175c and 185c were also used. mdf boards were produced in the laboratory and the common mechanical and physical properties were measured and compared. results showed that an increased steaming temperat...

physicochemical and mechanical properties of wheat grains can have a great impact on the quality of the final products (bread). therefore, correct selection of wheat cultivar for specific applications seems to be crucial. in this study, the differences in the physicochemical and mechanical properties (under compression and impact loadings) of ten iranian wheat cultivars (azar2, alamut, bam, bah...

Purpose: Development of new building materials with improved exploitational properties allowing to isolate various nature waste. Methods: Chemical methods analysis; experimental research in laboratory conditions; physical-mechanical methods, statistical methods. Results: New material, possessing geo-protective properties, has been obtained which contains outgoing oily paper filters formed durin...

the development of nano/ultrafine bainitic structure in aisi 52100 steel was the goal of this study. for this purpose,the aisi 52100 the specimens were austenitized at 1050 °c for 60 min followed by low-temperature austemperingtreatment at different temperatures and times. the austempered samples were characterized using field emissionscanning electron microscopy (fesem), x-ray diffraction (xrd...