The aim of this work was the evaluation of the catalytic steam reforming of a gaseous fuel obtained by steam biomass gasification to convert topping atmosphere residue (TAR) and CH4 and to produce pure H2 by means of a CO2 sorbent. This experimental work deals with the demonstration of the practical feasibility of such concepts, using a real woodgas obtained from fluidized bed steam gasificatio...

Agricultural by-products represent a considerable quantity of harvested commodity crops. The use of by-products as precursors for the production of widely used adsorbents, such as activated carbons, may impart a value-added component of the overall biomass harvested. Our objective in this paper is to show that flax shive and cotton gin waste can serve as a precursor for activated carbon that ca...

In this study, thermochemical biomass gasification was performed on a bench-scale fluidized-bed gasifier with steam and air as fluidizing and oxidizing agents. Distillers grains, a non-fermentable byproduct of ethanol production, were used as the biomass feedstock for the gasification. The goal was to investigate the effects of furnace temperature, steam to biomass ratio and equivalence ratio o...

in this study, the recycling possibility of residual oil fly ash (rofa) towards preparing activated carbon and its application in environmental remediation through adsorbing cu (ii) and pb (ii) ions from aqueous solutions were investigated. activated carbons were prepared using two different physical activation methods such as under steam flow at 950 0c, and combined steam and co2 flow at 850 0...

in this paper, first a sensitivity analysis of parameters affecting the performance of the steam generator is performed. this process includes the pinch temperature difference and the gas velocity (width of the hrsg) as the operating parameter and geometrical parameters (fin’s thickness, fin’s height, number of fins in each inch, tube transverse pitch) for each pressure parts is carried out, an...

In cooperation with Rolls-Royce and Lund University, a combined cycle power plant was modelled, simulated and optimised in the new software framework, the GTPOM tool, developed through the recent EC FP5 programme. The goal was not only to calibrate its component models but also to show how this new tool can be used. This paper presents the gas turbine and combined cycle whole plant modelling an...

In recent years, Integrated Gasification Combined Cycle Technology (IGCC) has been gaining steady popularity for use in clean coal power operations with carbon capture and sequestration. Great efforts have been continuously spent on investigating various ways to improve the efficiency and further reduce the greenhouse gas (GHG) emissions of such plants. This study focuses on investigating two a...

Hydrogen was produced by steam reforming of dimethyl ether (DME) using a physical mixture of commercial HZSM-5 zeolite (for DME hydrolyzing) and Cu/ZnO/Al2O3 (for methanol steam reforming) as a catalyst in a fixed bed reactor. The experiments were performed at atmospheric pressure and in a temperature range from 270 to 310 °C. The effects of feed temperature and gas hourly space velocity (GHSV)...

In the present study, exhaust gases from Tehran refinery crude oil furnace are used in a Heat Recovery Steam Generator (HRSG)for generating steam. Then, the steam is directed to a double effect absorption refrigeration cycle to produce cooling. To meet the object, mass and energy balance equations of the coupling is carried out for both the HRSG and the absorption chiller and unknown thermodyna...

Methanol steam reforming plays a pivotal role to produce hydrogen for fuel cell systems in a low temperature range. To accomplish higher methanol conversion and lower CO production, the reaction was catalyzed by CuZnFe mixed oxides. Various ratios of Fe and Cu/Zn were coprecipitated in differential method to optimize the CuZnFe structure. The sample containing 45Cu50Zn5Fe (Wt. %) revealed its m...