The prediction of porosity is achieved by using available core and log data; however, the estimation of permeability is limited to the scare core data. Hence, porosity and saturation data through the framework of flow units can be used to make an estimation of reservoir permeability. The purpose of this study is to predict the permeability of a carbonate gas reservoir by using physical-based em...

Advanced techniques have greatly promoted the exploitation of shale gas from shale matrix with low permeability. But the gas transport mechanism in shale is still unclear. Due to the multi-scale pore systems in a shale reservoir, viscous flow, slip flow, Knudsen diffusion and adsorption/desorption should be applied to the flowing equation so that it can properly predict gas flow dynamics. Multi...

Tight-gas and shale-gas systems can undergo significant depressurization during basin uplift and erosion of overburden due primarily to the natural leakage of hydrocarbon fluids. To date, geologic factors governing hydrocarbon leakage from such systems are poorly documented and understood. Here we show, in a study of produced natural gas from 1,907 petroleum wells drilled into a Triassic tight-...

Klinkenberg effect for gas permeability and its comparison to water permeability for porous sedimentary rocks W. Tanikawa and T. Shimamoto Kochi Institute for Core Sample Research, Japan Agency for Marine-Earth Science and Technology (JAMSTEC), 200 Monobe-otsu, Kochi, Japan. Department of Geology and Mineralogy, Faculty of Science, Kyoto University, Kitashirakawa-Oiwake-Cho, Sakyo-ku, Kyoto, Ja...

A soil gas measurement method developed earlier, [Nucl Tracks Radiat Meas, 22(1-4) (1993) 468] was applied to boreholes drilled to below foundation depth. Radon concentration and permeability were measured at 50-cm intervals. In radon prone areas, permeability showed an increase with depth over several orders of magnitude, indicating a low permeability top layer with a thickness of 0.5 m and mo...

Gas separation membranes are one of the lowest energy technologies available for the separation of carbon dioxide from flue gas. Key to handling the immense scale of this separation is maximised membrane permeability at sufficient selectivity for CO2 over N2. For the first time it is revealed that metals can be post-synthetically exchanged in MOFs to drastically enhance gas transport performanc...

A 3D lattice Boltzmann model is developed and used to calculate the water and gas permeabilities of model cement pastes at different degrees of water saturation. In addition to permeable micron-sized capillary pores and impermeable solid inclusions, the lattice Boltzmann model comprises weakly-permeable nano-porous calcium silicate hydrate (C-S-H). The multi-scale problem is addressed by using ...

In recent years, borehole Stoneley wave amplitude and reflectivity have been used for estimating formation permeability based on the strong correlation between Stoneley wave attenuation, reflectivity and formation fluid conductivity. There are other factors, however, that may cause substantial Stoneley attenuation and reflection in a borehole environment. To make better use of Stoneley measurem...