Oxygen gas-liquid mass transfer coefficient was measured in a gas-induced pulsating flow bubble column. Pulsating amplitude had a great influence on kla under pulsating state of equal base flow and pulsating flow, which was enhanced up to 30 % compared with that under steady state; however, it had a negative effect on mass transfer under a fixed low base flow. It was also found that kla had a n...

gas motion within the cylinder is one of the major factors that control the combustion process in spark ignition engine. it also has significant impact on heat transfer. both the bulk gas motion and the turbulence characteristics of the flow are important and governing the overall behavior of the flow. an arrangement for obtaining a stratified charge, using port injection, is proposed for a cur...

Microscale multiphase flows (gas-liquid and liquid-liquid) possess a number of unique properties and have applications ranging from use in microchemical synthesis systems to heat exchangers for IC chips and miniature fuel cells. Our work is focused on gas-liquid flows in microfabricated channels of rectangular or triangular cross section. We characterize the phase distribution and pressure drop...

This work investigates the effect of different conditions of PFO thermal cracking from two PFO samples on liquid, solid and gas product yield and asphaltene removal efficiency in a new designed experimental setup. No need to use a catalyst, simple operating system and experiment conditions, the ability to use water as a cheap carrier gas and high asphaltene extraction efficiency without the use...

Detecting bubble in two-phase flow has been a basic issue in two-phase flow systems. A new method for measuring the frequency of bubble formation is presented in this paper. For this purpose, an electronic device was designed and constructed which works based on a change in intensity of laser beam. For this purpose, continues light beam is embedded just above the needle, which is received by a ...

In the high sulfur natural gas purification unit, connecting pipe of a lean/rich amine heat exchanger is extremely susceptible to corrosion due acid and liquid condition. This work numerically investigated gas–liquid flow real-scale pipeline with two horizontal sections, one vertical section four elbow sections. The effect holdup on pattern, distribution velocity pressure, rate was using an exp...

This pape,r describes a flow-visualizatio n technique that was employed to qualitatively evaluate the gas flow pattern inside a small, low side, hermetically sealed, re ciprocating refrigeration compressor. The applicable compressor des igns are those in which the suction gas from the evaporator is dumped into the compressor shell, and is then drawn through a muffler into the suction plenum of ...

In vacuum assisted resin transfer molding (VARTM) process, fiber preform defects result very often from inappropriate placement at edge regions when the fiber preform has three-dimensional shape. The unintentional permeability variation is difficult to detect by viewing through the transparent vacuum bag. In this paper, a method was proposed for detecting the local permeability variation of the...

The gas-liquid flow behavior through a milli-scaled channel provided with staggered herringbone-like static mixer was investigated using high-speed recordings. For three different substance systems consisting of water, 5 wt % acetic acid in aqueous solution, and propylene glycol as liquid phase nitrogen gas phase, patterns their transitions were determined by analyzing image sequences the summa...