the mechanical strength of cumin seed and the effects of moisture content, seed size, speed and direction of loading on the force and energy required to fracture cumin seed were investigated. the results showed that moisture and loading direction were significant at the 1% level on the force and energy required to fracture cumin seed. the effects of seed size on force and loading speed on energ...

introduction: thermal changes in laser assisted root canal therapy with the use of diode laser can predispose tooth structure to the fracture. this study evaluated the changes in flexural strength of dentin blocks after diode laser irradiations (810 nm). methods: a total of 60 dentinal blocks were prepared from freshly extracted teeth in three different thicknesses (300, 500 and 1000μm) and 20 ...

This study was performed to evaluate the effect of a lithium-disilicate spray-liner application on both the bond strength between zirconia cores and heat-pressed lithium-disilicate glass-ceramic veneers, and the fracture strength of all-ceramic zirconia crowns. A lithium-disilicate reinforced liner was applied on the surface of a zirconia core and lithium-disilicate glass-ceramic was veneered o...

The Photovoltaic industry still tends towards thinner wafers with larger area leading to higher breakage rate in production processes. Strength characterization is needed in order to understand the fracture process and to optimize process steps. In this work different methods to measure the strength of photovoltaic wafer are presented and performed. Due to large deflection in experiment non-lin...

The fracture strength and crack propagation of monolayer molybdenum disulfide (MoS2) sheets with various pre-existing cracks are investigated using molecular dynamics simulation (MDS). The uniaxial tensions of pre-cracked monolayer MoS2 sheets with different crack tips, different locations of crack, different crack lengths and angled cracks are simulated and studied. The results show that the c...

Objective: To evaluate fracture strength of veneered translucent zirconium dioxide crowns designed with different porcelain layer thicknesses. Materials and Methods: Sixty crowns, divided into six groups of 10, were used in this study. Groups were divided according to different thicknesses of porcelain veneer on translucent zirconium dioxide cores of equal thickness (0.5 mm). Porcelain thicknes...

Stem and peduncle bending by the weight of the flower is one of the main postharvest problems in gerbera (Gerbera jamesonii Bolus.) and sometimes caused stem crushing or water loss. In this research, silicon and salicylic acid were applied to enhance the mechanical strength of inflorescence stem, and the results revealed that stem curving was decreased by silicon and salicylic acid treatments. ...

PURPOSE To investigate the microtensile bond strength between two all-ceramic systems; lithium disilicate glass ceramic and zirconia core ceramics bonded with their corresponding glass veneers. MATERIALS AND METHODS Blocks of core ceramics (IPS e.max® Press and Lava™ Frame) were fabricated and veneered with their corresponding glass veneers. The bilayered blocks were cut into microbars; 8 mm ...

This paper discusses the strength mis-match effect on cleavage fracture of notched materials based on the local approach. The aim of the study is to verify the independence of the critical Weibull stress at fracture on the strength mis-match condition. Diffusion bonded joints were made with two materials S and H different in strength level. Two types of 3-point bend specimen were extracted. One...

Skeletal responses to damage are significant for understanding the etiology of stress fractures and possibly osteoporotic fractures. We refined the rat forelimb-loading model to produce a range of sub-fracture damage levels during in vivo cyclic loading. A total of 98 right forelimbs of anesthetized, male, 5-month old Fischer rats were loaded cyclically (2 Hz) in axial compression. Rats were ki...