In this study, a wrapper approach was applied to objectively select the most important variables related to two different anaerobic digestion imbalances, acidogenic states and foaming. This feature selection method, implemented in artificial neural networks (ANN), was performed using input and output data from a fully instrumented pilot plant (1 m3 upflow fixed bed digester). Results for acidog...

The use of X-ray radioscopy for in-situ studies of metal foam formation and evolution is reviewed. Selected results demonstrate the power of X-ray radioscopy as diagnostic tool for metal foaming. Qualitative analyses of foam nucleation and evolution, drainage development, issues of thermal contact, mold filling, cell wall rupture and more are given. Additionally, quantitative analyses based on ...

The current study presents an effective and simple strategy to obtain stable porous scaffolds from gelatin via a gas foaming method. The technique exploits the intrinsic foaming ability of gelatin in the presence of CO2 to obtain a porous structure stabilised with glutaraldehyde. The produced scaffolds were characterised using physical and mechanical characterisation methods. The results showed...

The self-propagating foaming process of porous Al-Ni intermetallics was investigated. Aluminum and nickel powders were blended, and titanium and boron carbide powders were added as reactive exothermic agents. The blended powder was extruded to make a rod-shape precursor. Only one end of the rod precursor was heated to ignite the reaction. The reaction propagated spontaneously throughout the pre...

The influence of the addition of organic compounds, such as palmitic acid and cholesteryl myristate, on the porous structure of Fe-Al intermetallics formation has been investigated in detail in this paper. It was found that additives have a significant effect on the final porosity of the obtained sinters. Formed gaseous products from combustion play the role of the foaming agent during Fe-Al in...

This study aimed to develop natural colorant tomato powder using foam mat drying method varying egg albumin (3, 5, and 7% w/w) as foaming agent, carboxymethyl cellulose (0.5% 1%) stabilizer concentrations dried at three various temperatures (60, 65, 70 °C). The properties of juice were analyzed. Foams prepared juice, incorporating (EA), (CMC), whipped thoroughly maximum speed for about 5 min. s...

Sodiumcocoamphopropionate (INCI; CAS132647-08-6; alternatively 93820-52-1) is an amphoteric surfactant that is used in skin cleansers, shampoos and hair conditioners as a foaming and cleansing agent. We report 5 cases of occupational contact dermatitis caused by sodium cocoamphopropionate in a disinfectant hand cleanser. All of the patients had been using the same hand cleanser brand, which con...

Foaming can be a serious problem in the process industry. For packed columns foaming is often reported for treatments of sour gases with alkaline solutions (e.g. amine scrubbing), but also for distillation and extractive distillation. Existing hydrodynamic prediction methods for pressure drop and flood points, but also for mass transfer efficiencies, do not consider foaminess. To build an exper...

In present research, the foam glass-ceramic composites fabricated by window glass, steel slag and SiC, CaCO3 foaming agents were investigated by press–sintering method. The optimum sintering temperature was obtained at 1200°C with a 3-minutes holding time and 20°C/min heating rate. The optimum pressure level of 80 MPa for achieving the 70 % of relative density was selected. The effec...

The aim of this study was to prepare poly-DL-lactide/polyethylene glycol (PDLLA/PEG) blends to improve medium absorption and cell proliferation in the three-dimensional (3-D) structure of their scaffolds. Carbon dioxide (CO2) was used as a foaming agent to create porosity in these blends. The results of Fourier transform infrared (FTIR) spectroscopy demonstrated that the blends were homogeneous...