Foam injection is becoming a standard conditioning agent when tunnelling with an earth-pressure balanced shield, resulting in an increasing interest in this technique. The technique is mostly based on empirical rules and experience. To be able to determine what foam and how may foam has to be injected for different soils, it is necessary to know the mechanical parameters of the foam-water-soil ...

Radiometric measurements of the microwave emissivity of foam were conducted in May 2000 at the Naval Research Laboratory’s Chesapeake Bay Detachment using radiometers operating at 10.8 and 36.5 GHz. Horizontal and vertical polarization measurements were made at 36.5 GHz; horizontal, vertical, +45, 45, left circular, and right circular polarization measurements were obtained at 10.8 GHz. Surface...

Foam is applied in enhanced oil recovery to improve the sweep of injected gas and increase recovery, by greatly reducing mobility gas. In laboratory, X-ray computed tomography commonly used evaluate performance foam core plugs. However, properties, such as bubble size capillary pressure, are much more difficult measure. recent years, microfluidic models have gained attention because they easily...

This paper reports measurements of yield stress of aqueous foams approaching the dry foam limit using a pendulum device. Traditionally, the vane rheometer has been used to measure the yield stress in liquids that exhibit wall slip. However, using the simple and inexpensive pendulum technique, shear rates many orders of magnitudes lower can be achieved. The pendulum was used to observe the chang...

Surfactants are often used to stabilise two-dimensional (2D) materials in environmentally friendly solvents such as water. Aqueous-surfactant solutions prevent agglomeration of nanosheets through steric and electrostatic repulsion, facilitating the production high concentration nanomaterial dispersions. Turbulent, shear-assisted liquid exfoliation layered precursor produces defect-free by promo...

Application of foam in EOR, increases macroscopic sweep efficiency via awesome increscent of mobility control. Macroscopic manifestation of foam application performance in porous media is complex process that involves several interacting microscopic foam events. Stability as an important factor in foam injection within large reservoirs, depends on several variables including oil saturation, con...

The compressive behavior of open-cell aluminum alloy foam and stainless steel woven textile core materials have been investigated at three different deformation rate regimes. Quasi-static compressive tests were performed using a miniature loading frame, intermediate rates were achieved using a stored energy Kolsky bar, and high strain rate tests were performed using a light gas gun. In agreemen...

Abstract: Enhanced foam flooding is a chemical flooding technology, which is applied to improve the recovery efficiency of oil and gas. The oil displacement agent of enhanced foam flooding is a foam that the polymer and surfactant solution as liquid. In this paper, three-dimensional mathematical model of unsteady flow is established about enhanced foam system in the porous media, and the numeri...

Foam mobility control and novel oil displacement mechanisms were observed in a microfluidic device representing a porous media system with layered permeability. Foam was pre-generated using a flow-focusing microfluidic device and injected into an oil-wet, oil-saturated 2-D PDMS microfluidic device. The device is designed with a central fracture flanked by high-permeability and low-permeability ...