1. In poultry investigations, the main interest is often to study the effects of many factors simultaneously. Two or three level factorial designs are the most commonly used for this type of investigation. However, it is often too costly to perform when number of factors increase. So a fractional factorial design, which is a subset or a fraction of a full factorial design, is an alternative. Th...

Machining of medium Brass alloy is very difficult. There are a number of parameters like cutting speed, feed and depth of cut etc. which must be given consideration during the machining of medium Brass alloy. This study investigates the effects of process parameters on Material Removal Rate (MRR) in turning of C34000. The single response optimization problems i.e. optimization of MRR is solved ...

In the present study, a comparison of central composite design (CCD) and Taguchi method was established for Fenton oxidation. [Dye]ini, Dye:Fe(+2), H2O2:Fe(+2), and pH were identified control variables while COD and decolorization efficiency were selected responses. L 9 orthogonal array and face-centered CCD were used for the experimental design. Maximum 99% decolorization and 80% COD removal e...

Welding is a key joining operation in many production and manufacturing industries, it requires scientific approach obtaining weld of high quality. This study focuses on the prediction optimization parameters mild steel plate using Taguchi technique. For experimental examination, 10mm thickness, along with input process such as current, arc voltage, gas flow rate, output parameter hardness were...

Machining can be outlined as the process of taking away material from a work piece in the grade of chips. During a machining process, isolated of the energy is turned into heat energy through the detritions yielded between the tool and the work piece and the plastic deformation of the work material in the machining zone. Turning is charmed by several constituents, for example, the cutting speed...

The process of material cutting and fracture by high velocity water jets is a complex series of phenomena which may involve compression, tension, shear, erosion, wears, cracking, wave propagation, and cavitations damage. This makes the exact analysis of the jet cutting process to be very complicated. The problem of water jet coal cutting is a multiresponse problem. There are two output variable...

An improved immune algorithm, named the Taguchi-immune algorithm (TIA), is proposed to solve global numerical optimization problems with continuous variables based on both the features of a biological immune system and the systematic reasoning ability of the Taguchi method. In the TIA, the clonal proliferation within hypermutation for several antibody diversifications and the recombination by u...

parametric design optimization of an automotive body crashworthiness improvement is presented. the thicknesses of parts are employed as design variables for optimization whose objective is to increase the maximum deceleration value of the vehicle center of gravity during an impact. using the taguchi method, this study analyzes the optimum conditions for design objectives and the impact factors ...

This paper presents the optimization of CNC turning parameters for EN 16 steel bar using the Grey Taguchi Method. A plan of experiments based on Taguchi’s L27 orthogonal array was established and turning experiments were conducted with prefixed cutting parameters for EN 16 steel bar using tungsten carbide tool. The turning parameters are cutting speed, feed rate and depth of cut and the respons...

CNC turning is widely used as a manufacturing process through which unwanted material is removed to get the high degree of surface rough. In this research article, Taguchi technique was coupled with grey relation analysis (GRA) to optimize the turning parameters for simultaneous improvement of productivity, average surface roughness (Ra), and root mean square roughness (Rq).Taguchi technique L2...