This paper summarizes the results of experimental observations and measurements of beam-beam interactions in DAΦNE, the Frascati Phi-factory. The achieved results are reported with analysis of present limitations in both single and multibunch operation modes and compared with numerical simulations.

The beam loss system, designed to protect the LHC from losses that could cause damage or quench a superconducting magnet, will need a significant upgrade in order to be able to cope with the new demands of the HL-LHC. In particular, cryogenic beam loss monitors are under investigation for deployment in the new inner triplet magnets to distinguish between collision debris and primary beam losses...

Transient thermal field in laser surface hardening treatment of medium carbon steel was analyzed by employing both three-dimensional analytical model and finite element model. In finite element model the laser beam was considered as a moving plane heat flux to establish the temperature rise distribution in the work-piece, while in analytical model laser beam was considered as an internal heat s...

In this article thermoelastic damping in nano-beam resonators is investigated based on nonlocal theory of elasticity and the Euler-Bernoulli beam assumptions. The governing equation of deflection of the beam is obtained from shear and moment resultants and stress–strain relationship of the nonlocal elasticity model and also the governing equations of thermoelastic damping are established by usi...

The aim of this paper is to compare the static deflections and stress results of layered and functionally graded composite beams under static load. In the comparison study, the results obtained for a cantilever beam under point load. The Timoshenko beam and the Euler-Bernoulli beam theories are used in the beam model. The energy based Ritz method is used for the solution of the problem and alge...

The performance of a polarizing beam splitter based on the one-dimensional photonic crystals (1D-PCs), is theoretically investigated. The polarizing beam splitter consists of a symmetric stack of the low-index quarter-wave plates and the high-index half-wave plates with a central defect layer of air. The linear transmission properties of the polarizing beam splitter are numerically simulat...

Analysis of a laminated composite beam under impact by a rigid particle is investigated. The importance of this project is to simulate the impact of objects on small scale aerial structures. The stresses are considered uni- axial bending with no torsion loading. The first order shear deformation theory is used to simulate the beam. After obtaining kinematic and potential energy for a laminated ...

In this paper, the effect of the crack on dynamic behavior of cracked micro-beam in the presence of DC and AC loads are investigated. By applying the residual axial stress and fringing field stress, a nonlinear analytical model of cracked micro-beam is presented and crack is modeled by a massless rotational spring. The governing equation of the system is solved using Galerkin procedure and shoo...

In this paper at first introduced constituent equations for piezoelectric and then by the help of this equations, internal energy of hinged-hinged piezoelectric multilayer beam was computed. Then by the principle of minimum potential energy and Rayleigh -Ritz method the bending curvature equation of hinged-hinged piezoelectric multilayer beam under concentrated moment, concentrated force, unifo...