The relationship between emissivity, delay time, and surface growth for metastable solidification of CoSi-62 at. % eutectic alloys is reported from undercooling experiments conducted using electrostatic levitation. A fraction of the undercooled melt is first solidified to CoSi2 with subsequent nucleation in the mushy-zone of CoSi after an observed delay time. During this double recalescence eve...

Semi-opaque to opaque films containing small amounts of various aluminium particles to decrease emissivity were easily prepared and coated onto low-density polyethylene (LDPE) sheets. The thermal-radiative properties (reflectivity, transmissivity and absorptivity) of the films were measured and related to the aluminum particles' content, size and nature. Time-to-ignition of samples was assessed...

2 New Jersey Institute of Technology, Department of Physics, 161 Warren Street, Newark, New Jersey 07102, U.S.A. 3 To whom correspondence should be addressed. E-mail: [email protected] 4 National Renewable Energy Laboratory, 1617 Cole Boulevard, Golden, Colorado 804013393, U.S.A. 5 JDS Uniphase Corporation, 100 Willowbrook Road, Freehold, New Jersey 07728-2879, U.S.A. 6 BTA Technology, 1982A ...

The epoch of the end of reionization and the Thomson optical depth to the cosmic microwave background depend on the power spectrum amplitude on small scales and on the ionizing photon emissivity per unit mass in collapsed halos. In this paper is investigated the role of the radiative feedback effects for the temporal evolution of the ionizing emissivity. It is shown that the observational const...

This study presents a method to estimate land surface temperature (LST) by calibrating spatial interpolation using satellite-derived surface emissivity. Four spatial interpolation methods including Inverse Distance Weighting (IDW), Spline, Kriging, and Cokriging were tested to interpolate LST in southern New England using ground temperatures measured at national weather stations (NWS) in summer...

Ceramic coatings with high emissivity were fabricated on TC4 alloys by micro-arc oxidation technique (MAO) in mixed silicate and phosphate electrolytes with varying KMnO₄ addition. The microstructure, phase and chemical composition were characterized by scanning electron microscope (SEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS), and the infrared emissivity of the MAO...

This contribution regards the Radio Frequency (RF) transmission line of the Megavolt ITER Injector and Concept Advancement (MITICA) experiment. The original design considered copper coaxial lines of 1″ 5/8, but thermal simulations under operating conditions showed maximum temperatures of the lines at regime not compatible with the prescription of the component manufacturer. Hence, an optimizati...

The high temporal resolution of data acquisition by geostationary satellites and their capability to resolve the diurnal cycle allows for the retrieval of a valuable source of information about geophysical parameters. In this paper, we implement a Kalman filter approach to apply temporal constraints on the retrieval of surface emissivity and temperature from radiance measurements made from geos...

− The emissivity behaviour of a silicon wafer under various conditions was theoretically and experimentally investigated. As a result, the quantitative relationship between the ratio of p-polarized radiance to spolarized one, and polarized emissivities was obtained irrespective of the emissivity change of wafers due to the oxide film thickness under the wide variations of resistivity. Based on ...

An onion-peeling technique is developed for inferring the emissivity profile of a stellarator plasma from a two-dimensional image acquired through a CCD or CMOS camera. Each pixel in the image is treated as an integral of emission along a particular line-of-sight. Additionally, the flux surfaces in the plasma are partitioned into discrete layers, each of which is assumed to have uniform emissiv...