In this study, the iron-based carbon composite (hereafter FCN-x, x = 0, 400, 500, and 600 calcination) was synthesized by a simple high-temperature pyrolysis method using iron-containing sludge coagulant generated from wastewater treatment settling ponds in chemical plants. The FCN-x used for adsorptive reduction of aqueous phase Cr(VI) effectively. characterized scanning electron microscopy (S...

This paper presents three new approaches to reduce excess sludge production in activated sludge systems: 1) modification of conventional activated sludge process with insertion of a sludge holding tank in the sludge return line; 2) chlorination of excess sludge so as to minimize excess sludge production; and 3) utilization of a metabolic uncoupler, 3, 3', 4', 5-Tetrachlorosalicylanilide (TCS) t...

Polymers have gained an extensive application due to their versatility of properties and benefits. Hence, the polymer blends composites reinforced with different infusions at scales, macro nanofillers, can be fabricated, leading specific tailormade applications. The main objective this investigation is overview various studies carried out reuse waste materials like electroplating sludge, fly as...

The poly(ethyleneimine)-functionalized silica has been developed successfully as an effective adsorbent for the adsorption removal of Cu(II) ions from electroplating wastewater. The influences of pH, contact time and initial concentration of Cu(II) ions on the adsorption capacity and the effect of adsorbent dosage on the removal efficiency of Cu(II) ions from electroplatin...

We demonstrated a practical process of fabricating nickel molds for nanoimprinting. Dual-side polished glass is chosen as the substrate on which nickel nanostructures are successfully electroplated. Photonic crystal structures with 242 nm diameters and other nanoscale pillars down to 9 nm diameters are achieved over a large area. The electroplating parameters are investigated and optimized. Thi...

Cu electrodeposition was performed on a cylindrical AZ80 substrate with a U-shaped surface. A uniform deposition of Cu was achieved on an AZ80 electrode via galvanostatic etching, followed by Cu electrodeposition in an eco-friendly alkaline Cu plating bath. Improper wetting and lower rotational speeds of the AZ80 electrode resulted in an uneven Cu deposition at the inner upper site of the U-sha...