Poly (2-hydroxyethyl methacrylate) PHEMA monolithic cryogels were synthesized by free radical polymerization at -12°C for 18 hours and produced spongy, elastic and macroporous gel matrix. Scanning Electron Microscopy (SEM) measured structural properties of PHEMA monolithic cryogel matrix to visualize pore morphology. Mechanical properties of PHEMA monolithic cryogel such as storage modulus, com...

The effect of chemical treatment at fiber–plastic interface and fiber loading level on creep property of bamboo fiber high-density polyethylene (BF/HDPE) composites was investigated. For single modifier systems, the use of maleic anhydride grafted polyethylene (PE-g-MA) as a coupling agent helped reduce the creep and achieved the optimum effect at the 5.7% loading level. The addition of either ...

Cyclic plasticity and creep are the primary design considerations of 1 and 2 stage gas turbine blades. Directionally-solidified (DS) Ni-base materials have been developed to provide (1) greater creep ductility and (2) lower minimum creep rate in solidification direction compared to other directions. Tracking the evolution of deformation in DS structures necessitates a constitutive model having ...

Creep polycrystalline ice samples antifreeze glycopeptides re-accelerating or tertiary samples. Previous work grain-boundary migration consistent with this, as nucleation and growth of curves containing (AFGPs) creep that has shown obtained from the low concentrations of do not show the is found in pure ice that AFGPs inhibit in ice and the present results are tertiary creep is associated with ...

The creep damage behavior of rocks is very important for evaluating the stability and safety key rock engineering. Based on Lianhua Tunnel Project in China, this paper aims to study mechanics, influencing factors constitutive models sandy shale. In order achieve these goals, a uniaxial compressive strength test under different moisture contents load levels were carried out. According results, p...

It has been suggested that the success of a meniscal replacement is dependent on several factors, one of which is the secure fixation and firm attachment of the replacement to the tibial plateau [Chen, M.I., Branch, T.P., et al., 1996. Is it important to secure the horns during lateral meniscal transplantation? A cadaveric study. Arthroscopy 12(2), 174-181; Alhalki, M.M., et al., 1999. How thre...

Pre-plated leadframes packages with a new noble metal finish type were exposed to various electrochemical migration tests, and mixed flowing gas environments to assess the quality and reliability due to these environmental conditions. Packages were tested as discrete parts and also as parts mounted onto printed circuit boards to assess the effect of reflow soldering. Selected packages with SnPb...

Polycrystalline yttrium aluminum garnet (YAG) fibers were prepared from commercially available colloidal sols of Y,O, and AlOOH and water-soluble polymers. The fibers were dry spun and all processing was performed in air. Transformation to YAG was complete by =1300"C, and the fibers were mostly dense by 1600°C with a final fired diameter of 120 pm. A bend test was used to characterize mechanica...

Background: The short-time creep behavior for a series of biodegradable nanocomposites which is used as implantable device into body is a crucial factor. In the current paper, we aimed to study the effect of bioactive glass nanoparticles (BGn) on creep and creep-recovery behaviors of PLA/PCL blends at different given load and different applied temperatures. Method: A series of biodegradab...