نتایج جستجو برای: dmta analysis

تعداد نتایج: 2824300  

2009
J. Cheng J. Li J. Y. Zhang

A novel trifunctional epoxy resin 4-(3, 3-dihydro-7-hydroxy-2, 4, 4-trimethyl-2H-1-benzopyran-2-yl)-1, 3-benzenediol glycidyl (shorted as TMBPBTH-EPOXY) was synthesized in our lab to improve thermal performance. Its curing behavior and performance were studied by using 4, 4′-diaminodiphenyl sulfone (DDS) as hardener with the mass ratio of 100:41 of TMBPBTH-EPOXY and DDS. The curing activation e...

2016
István Zoltán Halász Tamás Bárány

In this work, the effect of mixing temperature (Tmix) on the mechanical, rheological, and morphological properties of rubber/cyclic butylene terephthalate (CBT) oligomer compounds was studied. Apolar (styrene butadiene rubber, SBR) and polar (acrylonitrile butadiene rubber, NBR) rubbers were modified by CBT (20 phr) for reinforcement and viscosity reduction. The mechanical properties were deter...

2012
Rentong Yu Sixun Zheng Xiuhong Li Jie Wang

We report an investigation of the influence of block copolymer architectures on formation of nanophases in epoxy thermosets via reactioninduced microphase separation approach. Toward this end, three binary block copolymers composed of polystyrene (PS) and poly(ε-caprolactone) (PCL) were synthesized via the combination of ring-opening polymerization (ROP) and atomic transfer radical polymerizati...

ژورنال: :مهندسی مکانیک مدرس 2013
فرامرز آشنای قاسمی محمود اسلامی فارسانی

چکیده- موادی که ترکیبی از میرایی و سفتی بالا دارند در بسیاری از کاربردهای صنعتی مورد توجه هستند. در تحقیق حاضر خواص میرایی و سفتی نانوکامپوزیت¬های پلی¬پروپیلن/کربنات¬کلسیم مورد بررسی قرار گرفته است. به منظور پراکندگی بهتر نانوذرات کربنات کلسیم در ماتریس پلی پروپیلن، نانوذرات اولیه با یک تک لایه از اسید استایریک روکش شدند. تمامی ترکیب ها شامل 5، 10، 20 و 30 درصد وزنی از نانوذرات در یک اکسترودر د...

ژورنال: :مهندسی مکانیک مدرس 2015
وحید زال حسن مسلمی نایینی احمدرضا بهرامیان هادی عبداللهی امیرحسین بهروش

در این مقاله به بررسی تاثیر دمای فرآوری و تولید بر روی خواص الاستیک و ویسکوالاستیک نظیر مدول ذخیره، ضریب دمپینگ و مدول اتلاف کامپوزیت های زمینه پی وی سی تقویت شده با الیاف شیشه بافت مسطح پرداخته شده است. برای این منظور نمونه های کامپوزیتی در سه دمای 160، 200 و 230 درجه سانتیگراد به روش انباشت لایه ها و با چیدمان 10[0/90]، تولید شده است. این نمونه ها در ابتدا مطابق استاندارد astm d790-07، تحت آز...

Journal: :Journal of composites science 2022

Mechanical properties of fiber-reinforced polymers are sensitive to environmental influences due the presence polymer matrix but inhomogeneous and anisotropic fibers. Hence, structural analysis with mechanical as a function loading, environment, design, material condition produces more precise, reliable, economic structures. In present study, an analytical model is developed that can predict en...

2009
Desmond J. VanHouten Donald G. Baird

In this study, carbon nano-fibers (CNFs) were used to increase the compressive properties of poly(arylene ether sulfone) (PAES) foams. The polymer composite pellets were produced by melt blending the PAES resin with CNFs in a single screw extruder. The pellets were saturated and foamed with water and CO2 in a one-step batch process method. Dynamic mechanical thermal analysis (DMTA) was used to ...

2011
Kevin Magniez Thomas Chaffraix Bronwyn Fox

The interlaminar toughening of a carbon fibre reinforced composite by interleaving a thin layer (~20 microns) of poly(hydroxyether of bisphenol A) (phenoxy) nanofibres was explored in this work. Nanofibres, free of defect and averaging several hundred nanometres, were produced by electrospinning directly onto a pre-impregnated carbon fibre material (Toray G83C) at various concentrations between...

Journal: :Soft matter 2014
Somjit Tungchaiwattana Muhamad Sharan Musa Junfeng Yan Peter A Lovell Peter Shaw Brian R Saunders

Ionomers are polymers which contain ionic groups that are covalently bound to the main chain. The presence of a small percentage of ionic groups strongly affects the polymer's mechanical properties. Here, we examine a new family of nanostructured ionomer films prepared from core-shell polymer nanoparticles containing acrylonitrile (AN), 1,3-butadiene (Bd) and methacrylic acid (MAA). Three new A...

2012
Stephen A. Hall Brendan J Howlin Ian Hamerton Alex Baidak Claude Billaud Steven Ward

The construction of molecular models of crosslinked polymers is an area of some difficulty and considerable interest. We report here a new method of constructing these models and validate the method by modelling three epoxy systems based on the epoxy monomers bisphenol F diglycidyl ether (BFDGE) and triglycidyl-p-amino phenol (TGAP) with the curing agent diamino diphenyl sulphone (DDS). The mai...

نمودار تعداد نتایج جستجو در هر سال

با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید