This study investigated the microstructures of pearlite and martensite transformed from ultrafine-grained austenite in 0.45C steel and Vadded 0.45C steel. The mean prior austenite grain sizes were refined to be 4.5 μm in the 0.45C specimen and 2.4 μm in the V-added 0.45C specimen through cyclic heat treatment of austenitizing and water quenching, i.e., repetition of martensite § austenite trans...

The Fe-Cr-Ni stainless steels are well known for their ductile behaviour at cryogenic temperatures. This implies development and evolution of plastic strain fields in the stainless steel components subjected to thermo-mechanical loads at low temperatures. The evolution of plastic strain fields is usually associated with two phenomena: ductile damage and strain induced martensitic transformation...

In this paper, a new technology for a novel material inherent load sensor for sheet metal components of metastable austenitic steel is presented. The new technology is based on load induced martensite formation and is investigated in the Collaborative Research Centre (CRC) 653. The sensors are small areas in the sheet metal material, which have been plastically deformed by means of stamping. Du...

Influence of disorder, antisite defects, martensite transition and compositional variation on the magnetic properties and electronic structure of Mn(2)NiGa and Mn(1+x)Ni(2-x)Ga magnetic shape memory alloys have been studied by using full potential spin-polarized scalar relativistic Korringa-Kohn-Rostocker (FP-SPRKKR) method. Mn(2)NiGa is ferrimagnetic and its total spin moment increases when di...

Susceptibility of three lean-alloyed ferritic-austenitic stainless steels to hydrogen-induced delayed cracking was examined, concentrating on internal hydrogen contained in the materials after production operations. The aim was to study the role of strain-induced austenite to martensite transformation in the delayed cracking susceptibility. According to the conducted deep drawing tests and cons...

Morrison, Keith R. M.S.M.S.E., Purdue University, August 2014. Nickel Aluminum Shape Memory Alloys via Molecular Dynamics. Major Professor: Alejandro Strachan. Shape memory materials are an important class of active materials with a wide range of applications in the aerospace, biomedical, and automobile industries. These materials exhibit the two unique properties of shape memory and superelast...

In order to gain a better understanding of the formation of plessite in iron meteorites, various electron optical techniques were employed to study the range of plessite structures observed in the Carlton fine octahedrite. Compositional and structural studies of twins in clear taenite and the cloudy zone were made. Transmission electron microscopy studies of martensitic and duplex a + y plessit...

The damping characteristics of Ti50Ni50-xCux (x = 0~30 at.%) shape memory alloys (SMAs) at a low frequency have been studied using a dynamic mechanical analyzer. The magnitude of the tan δ value and the values of the storage modulus (E₀) softening/hardening and the strain variation exhibited in B2↔B19 transformation are all higher than those in B2↔B19' transformation. The larger E₀ softening/ha...

The microstructure and properties of a 5 wt.% Cr cold work tool steel were studied after austenitisation at 1020°C, 1050°C or 1075°C followed by single, double and triple tempering treatments at 525°C. The microstructures were investigated with scanning electron microscopy and X-ray diffraction and phase transformations were studied by dilatometry. Furthermore, hardness and Charpy un-notched an...

austenite is a semi-stable phase in most stainless steels that deforms to martensite under md30 and forms martensitetype ά and ε due to the deformation in the steels. since the distribution of strain induced martensite plays animportant role in achieving desired properties, the main objective of the present work is to model martensitedistribution of ά during cold rolling using finite element me...