Background Polydimethyl silicones (silicone oils) are used in complex retinal surgeries, including difficult or recurrent retinal detachments, severe eye trauma, and other indications for long term tamponade. Two major problems with currently available silicone oils are emulsification and recurrent retinal detachment. The primary endpoint of this study was to evaluate the toxicity and safety of...

A supercritical methanol transesterification method was applied to produce biodiesel from the high-acid oil of soybean soapstock. The fuel properties of biodiesel produced with various molar ratios of methanol to raw oil were analyzed and compared in this experimental study. Oleic acid (C18:1), linoleic acid (C18:2), and palmitic acid (C16:0) were the three main compounds in the high-acid oil-b...

Effect of strong electrolytes on the viscosity of canola oil in 1,4 dioxane was undertaken. The viscosity of oil in 1,4 dioxane was found to increase with the concentration of oil and decrease with rise in temperature. Strong electrolytes reduce the rate of flow of oil in 1,4 dioxane. It was noted that amongst these electrolytes, NaOH is more efficient reducing electrolyte than HCl and NaCl. Th...

Unconventional oils mainly heavy oils, extra heavy oils and bitumens represent a significant share of the total oil world reserves. Oil companies have expressed interest in unconventional oil as alternative resources for the energy supply. These resources are composed usually of viscous oils and, for this reason, their use requires additional efforts to guarantee the viability of the oil recove...

Turbochargers are most widely used in automotive, marine and locomotive applications with diesel engines. To increase the engine performance nowadays, in aerospace applications also turbochargers are used. Mostly the turbocharger rotors are commonly supported over the fluid film bearings. With the operation, lubricant properties continuously alter leading to different load bearing capacities. T...

Hydroprocessing has become the main technology for the production of API Group II and III base oils. One of the key properties is viscosity index for Group II and III base oils. The effect of wax content in hydrocracker unconverted oil on viscosity index and yield was studied in a 400 kton/year hydroisomerization dewaxing plant at a total pressure of 15 MPa, a feed rate of 38 ton/hour, and a ga...

Vegetable oils and fats in comparison with diesel fuel have high viscosity, by transesterification method the viscosity of oil can be decreased. Transesterification of triglyceride with alcohol is one of the methods for production of biodiesel. In this study sunflower oil, methanol and ethanol, with molar ratio of (1:3, 1:4, 1:6, 1:8) and temperature (40, 50, 60 º C) were dependent parameters e...

This paper addresses the generation and control of oil droplets in rolling piston type refrigerant compressors at speeds greater than 5000 RPM. This work is part of the development of a variable speed compressor which addresses the problem of critically low oil sump levels that can occur at these extreme speeds. This paper identifies the dominant mechanism of oil droplet generation based on exp...

HFC-134a is used as working fluid in refrigerators widely. However, how to improve the efficiency of compressor and refrigerator is major topic in the word. The purpose of this study is aimed at the performance evaluation of compressors with different viscosity of POEs oil. A hermetic reciprocating compressor using HFC-134a as refrigerant was adopted and the experimental investigation was carri...

In the present work, the influences of temperature, solvent concentration and ultrasonic irradiation time were numerically analyzed on viscosity reduction of residue fuel oil (RFO). Ultrasonic irradiation was applied at power of 280 W and low frequency of 24 kHz. The main feature of this research is prediction and optimization of the kinematic viscosity data. The measured results of eighty-four...