In this paper, buckling of cylindrical grooved shells under axial load has been examined by theoretical and experimental methods. The shell is made of USA/API – X42 5L steel standards. This material is one of the most common materials used in gas, oil and petrochemical industries. The effect of spiral grooves on cylindrical shell was analyzed, and the results obtained from the Abaqus software w...

In this paper, the plastic limit load of cylindrical shells with opening subject to combined bending moment and axial force are found by finite element method using ANSYS suite of program. The effect of various parameters such as the geometrical ratios of shell and the shape, size, axial and angular position of the opening on the limit load of cylindrical shells under various loading conditions...

In this paper, the influence of the constituent volume fractions by changing the values of the power-law exponent with uniform pressure on the vibration frequencies of reinforced functionally graded cylindrical shells is studied. The FGM shell with ring is developed in accordance to the volume fraction law from two constituents namely stainless steel and nickel. These constituents are graded th...

PANDA2, a computer program for the minimum-weight design of elastic perfect and imperfect stiffened cylindrical panels and shells under multiple sets of combined loads, is used to obtain optimum designs of uniformly axially compressed elastic internal T-ring and external T-stringer stiffened cylindrical shells with initial imperfections in the form of the general buckling mode. The optimum desi...

We describe calculations of the properties of quantum fluids inside nanotubes of various sizes. Very small radius (R) pores confine the gases to a line, so that a one-dimensional (1D) approximation is applicable; the low temperature behavior of 1D He is discussed. Somewhat larger pores permit the particles to move off axis, resulting eventually in a transition to a cylindrical shell phase—a thi...

This review paper aims to present an updated review of papers, conference papers, books, dissertations dealing with nonlinear vibrations of circular cylindrical thin shells. This paper surveyed mathematically, experimentally, analytically, numerically analyzed vibrations of cylindrical shells. This includes shells of open type, closed type, with and without fluid interactions; shells subjected ...

Cylindrical shell in engineering has different cross-section, i.e., circular section, oval rectangular and so on. In this work, numerical analysis is conducted on natural vibration of cylindrical with the difference studied between modal frequency shape from section shell. Numerical results show that, same length, width /thickness boundary condition, first 10 order nearly 60% bigger than that T...

understanding how a cutout influences the load bearing capacity and buckling behavior of cylindrical shells is fundamental in the design of structural components used in automobiles, aircrafts, and marine structures. in this article, simulation and analysis of steel cylindrical shells with various lengths, include quasi elliptical cutout, subjected to axial compression were systematically carri...

In this paper an optimization problem for a cylindrical shell is discussed. The aim is to look for an optimal thickness of a shell to minimize the deformation under an applied external force. As a side condition, the volume of the shell has to stay constant during the optimization process. The deflection is calculated using an approach from shell theory. The resulting control-to-state operator ...

~This report presents the first stage of an investigation of the response to random noise of a stiffened cylinder, representing an aircraft fuselage, including an analysis of the lower modes of such a cylinder. Preliminary investigations suggested that assumptions and approximations which are valid for the uniform, i.e., unstiffened, shell are not necessarily valid for a shell with heavy stiffe...