OBJECTIVE The purpose of this study was to compare the effect of light curing distance on the cytotoxicity of five resin composites cured with three high-power light curing units. STUDY DESIGN Seven cylindrical discs of each material (Grandio®, Voco; Filtek™ Z250, 3M ESPE; Clearfil™ AP-X, Kuraray Co. Ltd.; Aelite™ LS, Bisco Inc. and Simile®, Pentron) were cured. For curing, soft-up mode of qu...

The curing reaction of a commercial cold-curing structural epoxy resin, specifically formulated for civil engineering applications, was analyzed by thermal analysis as a function of the curing time and the sample thickness. Original and remarkable results regarding the effects of curing time on the glass transition temperature and on the residual heat of reaction of the cold-cured epoxy were ob...

Abstract-Predicting 28-day compressive strength of concrete is an important research task for many years. In this study, concrete specimens were cured in two phases, initially at room temperature for a maximum of 30 h and later at a higher temperature for accelerated curing for a maximum of 3 h. Using the early strength obtained after the two-phase curing and the curing parameters, regression e...

as regards if curing stops for some time and then resumes again, then strength gain will also stop and reactive, in this study with choose suitable curing conditions after improper first curing (recurring) for normal and silica-fume concrete, effect of this curing conditions on strength and permeability was investigated. the results from tests such as compressive strength, capillary water absor...

This study investigated the influence of modulated photo-activation on axial polymerization shrinkage, shrinkage force, and hardening of light- and dual-curing resin-based composites. Three light-curing resin composites (SDR bulk-fill, Esthet X flow, and Esthet X HD) and one dual-curing material (Rebilda DC) were subjected to different irradiation protocols with identical energy density (27 J c...

In order to investigate the effects of microwave curing on the microstructure of the interfacial transition zone of mortar prepared with a composite binder containing glass powder and to explain the mechanism of microwave curing on the improvement of compressive strength, in this study, the compressive strength of mortar under microwave curing was compared against mortar cured using (a) normal ...

Microsilica concrete was prepared with a water-binder ratio of 0.35. Microsilica was used as a 10% replacement of cement by weight. Cylinder and cube specimens were cast for testing different hardened properties of the concrete. Three curing methods such as water curing, wrapped curing, and dry-air curing were applied at 20±2 C to cure the cylinder and cube specimens until the 0 day of testing....