Hierarchically mesoporous CuO/carbon nanofiber coaxial shell-core nanowires (CuO/CNF) as anodes for lithium ion batteries were prepared by coating the Cu2(NO3)(OH)3 on the surface of conductive and elastic CNF via electrophoretic deposition (EPD), followed by thermal treatment in air. The CuO shell stacked with nanoparticles grows radially toward the CNF core, which forms hierarchically mesopor...

CuO nanosheets, Cr-doped CuO nanosheets, and Cr-doped CuO nanorods were prepared by heating a slurry containing Cu-hydroxide/Cr-hydroxide. Their responses to 100 ppm NO(2), C(2)H(5)OH, NH(3), trimethylamine, C(3)H(8), and CO were measured. For 2.2 at% Cr-doped CuO nanorods, the response (R(a)/R(g), R(a): resistance in air, R(g): resistance in gas) to 100 ppm NO(2) was 134.2 at 250 °C, which was...

CuO nanoflakes with dimension of 50–150 nm × 200 were successfully immobilized on the surface cellulose fibers by an ultrafast (5 min reaction time), scalable microwave assisted method. The high retention up to 70% has been phenomenal considering that immobilization was carried out in absence any linker, binder or aid. Retention almost 87% nanostructures even after five consecutive recyclabilit...

CuO nanoparticles (CuO-NP) were synthesized in a hydrogen diffusion flame. Particle size and morphology were characterized using scanning mobility particle sizing, Brunauer-Emmett-Teller analysis, dynamic light scattering, and transmission electron microscopy. The solubility of CuO-NP varied with both pH and presence of other ions. CuO-NP and comparable doses of soluble Cu were applied to duckw...

Bromate (BrO(3)(-)) in drinking water is traditionally seen as an ozonation byproduct from the oxidation of bromide (Br(-)), and its formation during chlorination is usually not significant. This study shows enhanced bromate formation during chlorination of bromide-containing waters in the presence of cupric oxide (CuO). CuO was effective to catalyze hypochlorous acid (HOCl) or hypobromous acid...

Cu is an essential trace element but can be highly toxic to aquatic organisms at elevated concentrations. Greater use of CuO engineered nanoparticles (ENPs) may lead to increased concentrations of CuO ENPs in aquatic environments causing potential ecological injury. We examined the toxicity of CuO ENPs to marine mussels and the influence of mussels on the fate and transport of CuO ENPs. We expo...

Copper oxide nanoparticles (CuO NPs) are heavily utilized in semiconductor devices, gas sensor, batteries, solar energy converter, microelectronics and heat transfer fluids. It has been reported that liver is one of the target organs for nanoparticles after they gain entry into the body through any of the possible routes. Recent studies have shown cytotoxic response of CuO NPs in liver cells. H...

Copper oxide (CuO) nanotubes were successfully converted from CuS nanowires embedded in anodic aluminum oxide (AAO) template by annealing-induced diffusion in a confined tube-type space. The spreading of CuO and formation of CuO layer on the nanochannel surface of AAO, and the confinement offered by AAO nanochannels play a key role in the formation of CuO nanotubes.

The present paper reports on the preparation of novel bamboo leaf shaped CuO nanorod dispersed hollow carbon fibers (denoted as CuO NR@PCFs). Specially, the new-type hollow carbon fibers (containing abundant micro/meso/macropores and a large specific surface area) were prepared only by simple and fast pyrolysis of the natural product catkins without using any template or surfactant. Meanwhile, ...