Modeling fuel behavior requires an accurate description of the cladding stress response for both operational and safety considerations. The transient creep response of Zirconium alloys is commonly modeled using a strain hardening rule which is known to hold in cases with monotonously increasing stresses. However, the strain hardening rule is experimentally known to fail in scenarios such as loa...

The internal factors which influenced the concrete creep behavior have been mostly divided by the creep model at home and abroad, but the computing is complex. In order to directly use the creep model in engineering conveniently, it is necessary to consider the effect of concrete strength grade on concrete creep. 302 creep test data with a loading age of 28 d, a lasting age of 360 d, and meet c...

Xyloglucan is widely believed to function as a tether between cellulose microfibrils in the primary cell wall, limiting cell enlargement by restricting the ability of microfibrils to separate laterally. To test the biomechanical predictions of this "tethered network" model, we assessed the ability of cucumber (Cucumis sativus) hypocotyl walls to undergo creep (long-term, irreversible extension)...

This study has investigated the creep properties of asphaltic concrete modified with different dosages of waste polyethylene terephthalate (PET) in two different ranges of size. Uniaxial dynamic creep test at 40°C was conducted on the cylindrical specimens of the mixtures. The load was applied in two different frequencies of 0.5 and 5Hz. Creep test results showed that the accumulated strain und...

In this study, the non-linear creep behaviour of a thick-walled cylinder made of stainless steel 316 is investigated using a semi-analytical method. The thick-walled cylinder is under a uniform internal pressure and a non-axisymmetric thermal field as a function of the radial and circumferential coordinates. For the high temperature and stress levels, creep phenomena play a major role in stress...

Assessment of creep damage and residual creep life of a cast HP 40 Nb Mod. Reformer tube was performed, wherein the experimental Larson–Miller diagram and area fraction of creep voids were adopted. The state of damage of the tube in service was metallographically analyzed by using light and electron microscopy. Samples from the serviced reformer furnace tube were cut and prepared for void exami...

This study investigates the time-dependent long-term creep strain in a composite cylinder made of glass/vinylester with a unidirectional ply. The cylinder is subjected to an internal pressure and the boundary condition is free–free and acts as thermal insulation. The classical lamination theory (CLT) is used to derive the governing equations as a second-order equation to determine the radial, c...

The isostatic state plays a central role in organizing the response of many amorphous materials. We construct a diverging length scale in nearly isostatic spring networks that is defined both above and below isostaticity and at finite frequencies and relate the length scale to viscoelastic response. Numerical measurements verify that proximity to isostaticity controls the viscosity, shear modul...

Since zinc die casting’s conception over 100 years ago, many new and improved developments have taken place to progress the industry and offer component designers a costeffective alternative to higher priced alloys and processes. The zinc industry has continued to develop new alloys in response to some of the challenges that face it. One such development is EZACTM, Eastern Alloys’ high strength...