نتایج جستجو برای: creep analysis

تعداد نتایج: 2832771  

2002
X. Q. Shi Z. P. Wang W. Zhou H. L. J. Pang Q. J. Yang

In this study, a large number of creep tests were carried out to study the effect of stress level and testing temperature on the creep behavior of 63 Sn/37Pb solder in a systematic manner. Based on the dislocation controlled creep mechanism and Gibbs’ free-energy theory, a new creep constitutive model was proposed. The model was found to describe accurately the creep flow of the solder and to b...

2016
Pratap Ganpatrao Patil Varsha Pratap Patil

From decades Creep has been known and studied for textile materials. In comparison, a newly observed phenomenon of inverse creep seems not to have received much attention. A new instrument has been fabricated to measure creep and inverse creep in textile materials particularly yarns. Creep and Inverse creep measurements of few of the textile yarns like nylon multifilament yarn, Polyester multif...

2015
Dezheng Liu Qiang Xu Zhongyu Lu Simon Barrans

This paper presents the development of finite element software for creep deformation and damage analysis of weldment. The development and benchmark test of the software under plane stress, plane strain, axisymmetric, and 3 dimensional cases were reported in previous work [1]. This paper primarily consists of two parts: 1) the structure of the new FE software and the existing FE library applied ...

A Ghorbanpour Arani, A Loghman, A.A Mosallaie Barzoki R Kolahchi

Time-dependent creep analysis is crucial for the performance and reliability of piezoactuators used for high-precision positioning and load-bearing applications. In this study history of stresses, deformations and electric potential of hollow rotating cylinders made of functionally graded piezoelectric material (FGPM), e.g., PZT_7A have been investigated using Mendelson’s method of successive e...

2011
Lawrence Yoo Hansang Kim Andrew Shin Vijay Gupta Joseph L. Demer

This paper characterized bovine extraocular muscles (EOMs) using creep, which represents long-term stretching induced by a constant force. After preliminary optimization of testing conditions, 20 fresh EOM samples were subjected to four different loading rates of 1.67, 3.33, 8.33, and 16.67%/s, after which creep was observed for 1,500 s. A published quasilinear viscoelastic (QLV) relaxation fun...

Journal: :Bioresource technology 2010
Yanjun Xu Qinglin Wu Yong Lei Fei Yao

The creep behavior of bagasse-based composites with virgin and recycled polyvinyl chloride (B/PVC) and high density polyethylene (B/HDPE) as well as a commercial wood and HDPE composite decking material was investigated. The instantaneous deformation and creep rate of all composites at the same loading level increased at higher temperatures. At a constant load level, B/PVC composites had better...

2000
Robert A.F. Zwijze Remco J. Wiegerink Theo S. J. Lammerink Miko Elwenspoek

0. Abstract Important problems in load cells are creep and hysteresis. Expensive high grade steels are used in order to reduce these effects. In this paper a load cell design based on a force to liquid pressure transformation is presented. The design is insensitive to hysteresis and creep and can be made at very low costs. Analytical, numerical and experimental results are in very close agreeme...

2013
S. V. Raj

Long term tensile creep studies were conducted on binary NiAl in the temperature range 700-1200 K with the objectives of characterizing and understanding the creep mechanisms. Inverse and normal primary creep curves were observed depending on stress and temperature. It is concluded that the primary creep of NiAl is limited by dislocation mobility. The stress exponent for creep, n, decreased fro...

A Loghman, E Loghman H Shayestemoghadam

Polypropylene is one of the most common, fastest growing and versatile thermoplastics currently used to produce tanks and chemical piping systems. Even at room temperature creep is considerable for polypropylene products. The creep behavior of strains, stresses, and displacement rates is investigated in a thick-walled cylinder made of polypropylene reinforced by functionally graded (FG) multi-w...

Journal: :Journal of animal science 1991
J D Cremin D B Faulkner N R Merchen G C Fahey R L Fernando C L Willms

This study was conducted with grazing nursing calves (197 kg) to determine the effects of 1) limiting creep feed intake and 2) increasing the concentration of ruminal escape CP in creep feed at a limited level of creep feed intake on fescue and milk intake, ruminal NDF digestion, and total tract digestibility in calves fed high-quality, freshly harvested fescue. The treatments were 1) control (...

نمودار تعداد نتایج جستجو در هر سال

با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید