A ferrite loaded accelerating cavity with a frequency sweep of 18 to 40MHz is studied for a possible upgrade of the CERN accelerator complex. The resonance frequency of a ferrite loaded cavity shifts by applying an external magnetic bias field to the ferrite material by means of changing the relative permeability. We present the electromagnetic design of such a cavity with a special emphasis on...

A two-dimensional diffusion based model is developed to describe transformation of austenite into ferrite and pearlite under continuous cooling conditions. The nucleation of ferrite is assumed to occur over grain boundaries and the nucleation of pearlite is assumed to be taking place all over the grain and at growing ferrite–austenite interfaces, when the composition and temperature conditions ...

Cast strips of 0.1mass% C steel with or without phosphorus addition have been characterized by electron back-scattering diffraction pattern (EBSP) measurements. Then the formation of globular ferrite structure was discussed. EBSP analysis combined with optical microscopy clearly showed that a globular grain was fitted to be an -ferrite grain. The EBSP analysis suggested that the retainedgrain g...

The manganese ferrite spinel was synthesized by co-precipitation. The nano sized manganese ferrite characterized by X-ray diffraction (XRD), Scanning electron micrograph (SEM), tunneling electron micrograph (TEM) and Energy dispersive X-ray (EDX) techniques. The adsorption ability of malachite green (MG) from the aqueous solution by manganese ferrite was investigated. It was found that pH value...

The optical properties of multi-functionalized cobalt ferrite (CoFe2O4), cobalt zinc ferrite (Co0.5Zn0.5Fe2O4), and zinc ferrite (ZnFe2O4) nanoparticles have been enhanced by coating them with silica shell using a modified Stöber method. The ferrites nanoparticles were prepared by a modified citrate gel technique. These core/shell ferrites nanoparticles have been fired at temperatures: 400°C, 6...

Nanoindentation measurements were obtained on eight commercially-produced DP980 dual-phase steels to quantify the hardness of the individual constituents, ferrite and martensite, in each steel. Each microstructure was also evaluated to determine grain size, martensite volume fraction (MVF), and retained austenite content. Nanoindentation hardnesses and quantitative microstructural measurements ...

The long-term objective of the present study was to determine the ability of NiZn ferrite nanoparticles to kill cancer cells. NiZn ferrite nanoparticle suspensions were found to have an average hydrodynamic diameter, polydispersity index, and zeta potential of 254.2 ± 29.8 nm, 0.524 ± 0.013, and -60 ± 14 mV, respectively. We showed that NiZn ferrite nanoparticles had selective toxicity towards ...

it is shown how the radiation characteristic of a patch antenna can be manipulated by a small number of normally magnetized ferrite disks inserted in the resonant region of the patch. It is shown that a oneand dual-band circular polarized microstrip antenna can be obtained by taking advantage of the interaction of the antenna cavity field with the magnetized ferrite disks. . The dependence of t...

There is general agreement that a weld microstructure primarily containing acicular ferrite will exhibit high strength and excellent toughness due to its small grain size, high dislocation density, and the way in which the plates are dispersed in the microstructure (Pargeter, 1983; Sneider and Ken, 1984). In contrast, the presence of allotriomorphic ferrite, ferrite plates with aligned carbides...

Cobalt ferrite (CoFe2O4) possesses excellent chemical stability, good mechanical hardness and a large positive first order crystalline anisotropy constant, which made this ferrite a promising candidate for magneto-optical recording media. In addition to precise control on the composition and structure of CoFe2O4, the success of its practical application will depend on the capability of controll...