Pilot-scale cooling towers can be used to evaluate corrosion, scaling, and biofouling control strategies when using particular cooling system makeup water and particular operating conditions. To study the potential for using a number of different impaired waters as makeup water, a pilot-scale system capable of generating 27,000 kJ∕h heat load and maintaining recirculating water flow with a Reyn...

Section 316(b) of the Clean Water Act (CWA) requires that "the location, design, construction, and capacity of cooling water intake structures reflect the best technology available for minimizing adverse environmental impact." As the U.S. Environmental Protection Agency (EPA) develops new regulations to implement Section 316(b), much of the debate has centered on adverse impingement and entrain...

Application of toxic antibacterial agents is considered necessary to control prevalent fresh water microorganisms that grow in evaporative cooling water systems, but can adversely affect the environment and human health. However, natural antibacterial water chemistry has been applied in industrial cooling water systems for over 10 years to inhibit microorganisms with excellent results. The wate...

Water demand prediction by end-use at an appropriate spatial and temporal resolution is essential for planning water supply systems that will supply water from a diversified set of sources on a fit-for-purpose basis. Understanding seasonal, daily and sub-daily water demand including peak demand by end-uses is an essential planning requirement to implement a fit-for-purpose water supply strategy...

In this report, experimental investigation of waste water treatment by reverse osmosis to enable its reuse in cooling tower is presented. A polyamide spiral wound RO membrane followed by three filters as RO pretreatment (two activated carbon and one cartridge filter) and samples of Tehran refinery treated waste water have been used. The effect of operating conditions such as pressure differ...

The energy consumption associated with domestic hot water supply services correspond to a significant portion of the total energy consumption of the urban water cycle. The objective of this study is to analyse the performance of domestic water heaters in the three largest cities of Australia (i.e. Sydney, Melbourne and Brisbane). The performance of systems was investigated undertaking a multi-p...

[1] During winter 2005–2006, particle fluxes and nearbottom currents were measured in and around the LacazeDuthiers and Cap de Creus submarine canyons (western Gulf of Lion). Current anomalies show the occurrence of a major dense shelf water cascading event down to the slope, the latest recorded up to date in the area. Concomitant increased total mass fluxes highlight the ability of cascading w...

Water vapor jet assisted metal cutting is a pollution-free green cutting technique. This paper has developed a three-dimensional finite element model of water vapor jet assisted cutting in order to understand the influence of its cooling and lubricating effect on cutting process. The cooling effect of water vapor jet is modeled with a convective heat transfer coefficient. A window with the temp...

The cooling efficiency of natural draft dry cooling system (NDDCS) are vulnerable to ambient winds, so the implementation of measures against the wind effects is of great importance. This work presents the combined air leading strategies to recover the flow and heat transfer performances of NDDCS. Following the energy balance among the exhaust steam, circulating water, and cooling air, numerica...