The sections composed of concrete and steel, which include concrete-encased concrete-filled tubes, generally have defects due to the low tensile strength of concrete. Therefore, an appropriate method was used for the combination of concrete-filled tubes (CFT) and prestressing strands which is encased in concrete. The conventional design guidelines are commonly developed for materials with norma...

This study concerns improvement of flexural stiffness/strength of concrete members reinforced with externally bonded, aluminum-glass fiber composite (AGC) beams. An experimental program, consisting of seven reinforced concrete slabs and seven reinforced concrete beams strengthened in flexure with AGC beams, was initiated under four-point bending in order to evaluate three parameters: the cross-...

concrete filled steel tube columns (cfst) are a kind of composite columns according to advantages of cfst relative to reinforced concrete and steel columns. use of these materials is common in recent years especially in high building, unnecessary of molding, high ductility, proportionate resistance with low volume, economical, low deformation relative to steel columns are among advantages. in t...

This paper presents an experimental program dealing with the shear strengthening with FRP systems of URM walls built with concrete and clay units. Ten concrete and five clay masonry panels, strengthened with FRP composites in the form of laminates and rods, and stainless steel, were loaded along the wall diagonal to observe their shear performance. The dimension of the concrete masonry panels w...

To evaluate the seismic performance of pre-cast concrete shear wall with vertical reinforcements spliced by two different grout ways, quasi-static tests of two concrete shear walls holed by prefabricated corrugated pipe and one concrete shear wall holed by drawing out the pipe were tested. The test results showed that the wall holed by prefabricated corrugated pipe was basically the same as the...

The correct determination of deformation capacity of a structural member will become more important in the future since nonlinear design methods will be used more often. This report deals with the examination of deformation capacity of the concrete compression zone. The influence of size and the effect of transversal reinforcement of prisms under eccentric compression on their deformation capac...

In seismic risk mitigation policies, fragility functions of existing buildings play a fundamental role. In this paper, a procedure to develop analytical fragility curves for Moment Resisting Frame Reinforced Concrete buildings is presented. The design of the selected building typologies was performed according to the codes at the time of construction using force-based methods and the state of t...

Over the last decade, enormous strides have been made in creating engineered cementitious composites (ECC) with extreme tensile ductility, on the order of several hundred times that of normal concrete or fiber reinforced concrete (FRC). Current ECC investigations include load carrying structural members in new infrastructure systems, as well as for repair and retrofitting of existing structures...

Corrosion of steel reinforcement in concrete structures and bridges is a major problem facing the departments of transportation worldwide. In the United States, maintenance and replacement costs are measured in billions of dollars. Salt environment in hot climate and the use of deicing salts in cold regions have resulted in steady deterioration of bridge decks due to corrosion. These concerns h...