Based on tests on six L-shaped RC columns with 500 MPa steel bars, the effect of axial compression ratios and stirrup spacing on failure mode, bearing capacity, displacement, and curvature ductility of the specimens is investigated. Test results show that specimens with lower axial load and large stirrup characteristic value (larger than about 0.35) are better at ductility and seismic performan...

This paper has investigated the effect of hole shape, hole size and hole position on elastic buckling of square perforated plates by using the finite element method. According to the effect law of these three geometric factors on buckling bearing capacity, buckling coefficient was obtained by data fitting. The results show that: The plate with circular perforation has the greatest buckling bear...

A compact axial active magnetic bearing with a function of two-tilt-motion control is fabricated which has a new configuration of magnetic poles. They consist of four cylindrical poles with coils and a single common pole whose opposite plane of the rotor has a permanent magnet to achieve multi-degree-of-freedom zero power control. Modal control is applied because local zero power control may ma...

This paper presents the results of a study on the axial compressive strength of columnsstrengthened with FRP wrap. The experimental part of the study included testing 6 reinforcedconcrete columns in two series. The first series comprised three similar circular reinforced concretecolumns strengthened with FRP wrap. The second series consisted of three similar square columns,two with sharp corner...

This article describes an instrument to measure the error motion of rolling element bearings. This challenge is met by simultaneously satisfying four requirements. First, an axial preload must be applied to seat the rolling elements in the bearing races. Second, one of the races must spin under the influence of an applied torque. Third, rotation of the remaining race must be prevented in a way ...

PURPOSE Among the different resistances occurring during wheelchair locomotion and that limit the user autonomy, bearing resistance is generally neglected, based on a few studies carried out in static conditions and by manufacturer's assertion. Therefore, no special attention is generally paid to the mounting and the maintenance of manual wheelchair bearings. However, the effect of inadequate m...

Due to construction costs and operational issues have been in this study discuss how strengthen the concrete columns. The results of previous studies on some structures earthquake-prone weakness reinforced inside steel casings surrounding columns is a modern technique used many countries today for rectangular circular concrete. advantages method convenient, economical easy. Reference model colu...