Resin transfer molding of an inorganic polymer binder was successfully demonstrated in the preparation of ceramic fiber reinforced engine exhaust valves. Unfortunately, in the preliminary processing trials, the resulting composite valves were too brittle for in-engine evaluation. To address this limited toughness, the effectiveness of a modified fiber-matrix interface is investigated through th...

The effective parameters that influence in situ cast ferroTic composites were investigated. Centrifugal casting of specimens was carried out using ceramic & metallic molds. OM, SEM and XRD techniques were used to examine the existence of flows in the specimens. Results show that the control of chemical composition, processing, cooling rate and heat treatment has a promising effect on the qual...

The excellent mechanical properties of carbon nanotubes (CNTS) are driving research into the creation of new strong, tough nanocomposite systems. Here, the first evidence of toughening mechanisms operating in carbon-nanotube-reinforced ceramic composites is presented. A highly ordered array of parallel multiwall CNTs in an alumina matrix was fabricated. Nanoindentation introduced controlled cra...

Aluminum matrix composites (AMCs), reinforced with ceramic particulates, have significant applications in the field of aerospace, marine, automobiles, sports and recreation. Al-TiC particulate composite has better potential for high-temperature applications. The corrosion behaviour of Al 6061-TiC particulate composites prepared by stir casting route, has been explored in chloride medium using e...

Research at the Materials Research Laboratory, Pennsylvania State University has demonstrated the potential for improving hydrophone performance using piezoelectric ceramic/polymer composites. As part of an ONR-funded initiative to develop cost-effective manufacturing technology for these composites, Materials Systems is pursuing an injection molding ceramic fabrication approach. This paper bri...

Carbon nanotubes are considered as excellent reinforcements for improving the properties of ceramic composites. This paper reviews the reported techniques for the preparation of various ceramic coated CNTs, CNT-ceramic composites, CNT-ceramic composite coatings, etc. It is noted that a wide range of techniques have been used to fabricate these composites. Their characterisation has revealed tha...

The novel reactive methylmethacrylate (MMA) thermoplastic resin (commercially known as Elium® resin) is the first liquid which curable at room temperature. This a competitive solution against traditional epoxy-based composites. In this work, non-crimp (NC) glass fabric/MMA composites were manufactured using vacuum infusion process. Cellulose microcrystals (CMCs) dispersed in to improve fibre/ma...

Alumina (Al2O3) is an advanced ceramic material developed for different applications as refractories, precision tools, pacemaker, etc. Solid state sintering of alumina or matrix composites (CMCs) compacts starts from powders. Once method to produce high quality aluminum oxide powders the sol-gel technique. begins pseudo-crystallized hydroxide gel which produced under moderate reaction condition...

Influences of process conditions on microstructure and dielectric properties of ceramic-polymer composites are systematically studied using CaCu3Ti4O12 (CCTO) as filler and P(VDF-TrFE) 55/45 mol.% copolymer as the matrix by combining solution-cast and hot-pressing processes. It is found that the dielectric constant of the composites can be significantly enhanced-up to about 10 times - by using ...