Metal casting processes routinely used in the foundry industry (e.g., gravity or pressure casting) are subject to a wide range of operational parameters. Since there is close correlation between solidification conditions, microstructure, and properties, effects thermal parameters alloying elements on microstructure designs resulting properties cast alloys have stimulated new research interest. ...

The experiment of the rheocasting-rolling for semi-solid magnesium was carried out on the equipment made by ourselves in our laboratory. Semi-solid AZ91D magnesium slurry was prepared by cooling slope and mchanical sirring The evolution of microstructure under different technological parameters were studied. The results show that the technological parameters have great influence on the microstr...

Abstract — Ceramic shell investment casting process is used to produce high quality metal products with relatively close dimensional tolerances. The refractory primary slurry that is applied to the surface of the pattern assembly, to pick up its surface details plays a very important role in ceramic shell investment casting process (CSICP). It produces a smooth, acceptable surface finish of the...

The paper considers the issues of necessity of use of mathematical simulation of the structuring process by crystallization. Performing such mathematical simulation of the casting process with directed crystallization will allow developing both the theoretical procedure for evaluation of grain of the cast structure and specify the basic requirements to the thermal and physical parameters of the...

The liquid metal flow and the solidification behaviours in a multi-cavity casting mould of two automotive cast parts were simulated in three dimensions. The commercial code, FLOW-3D® was used because it can track the front of the molten metal by a Volume of Fluid (VOF) method and allows complicated parts to be modeled by the Fractional Area/Volume Obstacle Representation (FAVOR) meth...

In the present work microstructural evolution of A356 Aluminum alloy using an inclined cooling plate casting process for thixoforming feedstock production is investigated. The resultant microstructure was evaluated and compared with those of the same alloy produced by the conventional casting process, i.e. directly cast in the same mold without using an inclined cooling plate. It was found that...