In this study, the performance of triangular added damping and stiffness (TADAS) dampers combined with curved dampers (Curved-TADAS damper) is evaluated in moment resisting steel frame (MRSF). These dampers are passive and install in the beam-column connection region. Variable parameters of this study involve the width of curved damper (50, 75 and 100 mm), the thickness of TADAS damper (5 and 1...

Heavy economic losses and human casualties caused by destructive earthquakes around the world clearly show the need for a systematic approach for large scale damage detection of various types of existing structures. That could provide the proper means for the decision makers for any rehabilitation plans. The aim of this study is to present an innovative method for investigating the seismic vuln...

Today connections are playing an important role in the steel frames subjected to lateral seismic loading. The steel extended end-plate moment connection can play an important role in the steel frame when subjected to seismic loadings. In the past, this type of connection has been under investigation mainly when it was subjected to monotonic loading. After major recent earthquakes and failure of...

Precast concrete structures in Iran are generally designed as continuous columns with hinged beams, thereby making them simple frames. In this system in site show walls in two directions of buildings guaranteed lateral resisting system. However, in order to obtain a seismic resisting frame, the connection between beam and column should be moment resisting and ductile, allowing the formation of ...

This paper presents a new design method of balance weights with phase angles for scroll compressors. Based on force and moment balances on crankshaft and compressor frame, mathematical formulation of shaft bearing loads, unbalanced force and moment acting on the frame has been made in terms of balance weight design parameters such as masses and phase angles of the upper and lower balance weight...

We are developing an intelligent interface for the many design evaluation programs becoming available in architecture. As the central part of this project we have developed a model of buildings, capable of holding all the information needed to describe a building to a number of design tools commonly used by architects. The model also contains knowledge about components in a building and their i...

Moment resisting frames as one of the conventional lateral load resisting systems in buildings suffer from some limitations including code limitations on minimum span-to-depth ratio to ensure the formation of plastic hinges with adequate length at beam ends. According to seismic codes, in ordinary steel moment resisting frames the minimum span-to-depth ratios should be limited to 5 and in speci...

Wind and earthquake disasters in the world often cause billions of dollars of damage to buildings, most of which is to non-engineered buildings-especially homes. Wood-frame homes use connectors which exhibit partial rotational rigidity at the member ends, making analytical solutions difficult. This is due to the lack of information about the complex behavior of the connections used in this type...