INTRODUCTION Indirect composites are developed to overcome the shortcomings of direct composites but, the adhesion of resin cements to indirect composites is still difficult. The purpose of this study was to evaluate the surface morphology of indirect resin composite treated by different powers of Er:YAG laser using Scanning Electron Microscopy (SEM). METHODS indirect resin composite blocks (...

OBJECTIVES This work aims to review the key factors affecting the polymerization efficiency of light-activated resin-based composites. The different properties and methods used to evaluate polymerization efficiency will also be critically appraised with focus on the developments in dental photopolymer technology and how recent advances have attempted to improve the shortcomings of contemporary ...

OBJECTIVES to complement our previous work by testing the null hypotheses that with short curing times and high DC, TPO-based resin composites would exhibit (1) higher polymerization stresses and consequently display (2) higher temperature rise and (3) higher flexural modulus, flexural strength and hardness, compared to a conventional CQ-based experimental composite. METHODS Two experimental ...

Coupling of fiber posts to composites is hampered by absence of chemical union between epoxy resins and methacrylate-based resins. This study examined a clinically feasible protocol for creating micromechanical retention on the surface of fiber posts, using hydrogen peroxide etching to remove the surface layer of epoxy resin. This was followed by silanization of the exposed quartz fibers to enh...

Abstract The prime purpose of the current research is to investigate influence Intumescent flame retardant (IFR)-Ammonium polyphosphate (APP) on mechanical properties Phenolic resin/E-Glass hybrid configurations and suitability configuration for battery casing in E-vehicle. Varying weight fractions viz. 2, 4, 6, 8, 10 wt% APP were used fabricate -Phenolic resin/E-Glass/APP polymer composites. T...

Using porcelain and resin-mixed composites as experimental materials, cubic polymerized composites were prepared by the accumulation of thin slices cured by laser scanning. The composites were then fired, and bulk ceramic bodies were made. The optimal firing conditions of polymerized composites and firing shrinkage were investigated. The results showed that cubic ceramic bodies in a form homolo...

The objective of this study was to investigate the mechanical properties of a low-shrinkage acrylate liquid crystalline resin matrix (ALCRM), (4-3-(acryloyloxy)-2-hydroxypropoxy) phenyl 4-(3-(acryloyloxy)-2-hydroxypropoxy) benzoate, combined with nano-hydroxyapatite (na-HA). The ALCRM monomer and diluent monomer triethylene glycol dimethacrylate (TEGDMA) were mixed at a mass ratio of 7:3 to pre...

background and aim: this study investigated the reinforcing effect of silica nanoparticles when incorporated into the matrix phase of an experimental dental fiber reinforced composites (frc) through the evaluation of the flexural properties of the composites. materials and methods: in this experimental study frc samples were divided into two main groups (containing two or three bundles) either ...

The placement of resin composites in posterior teeth is now a common procedure in dental practice. The aim of this study was to investigate current teaching of this procedure in Canadian dental schools and to compare trends in teaching with those in the United States. This study complements other investigations in which we examined teaching of the use of posterior resin composites in dental sch...