Materials and Methods: The study evaluated 10 samples each of fresh alloy, recast alloy with addition of 50% of wt. of new alloy and recast alloy without addition of new alloy. Samples were subjected to computerized Universal Testing Machine and mechanical properties viz. tensile strength, yield strength, percentage of elongation, modulus of elasticity and microhardness was tabulated. Data was ...

A novel hydrothermal layer-by-layer processing method for the fabrication of core/alloy nanoparticles with highly tunable surface plasmon resonance is described. For a model system of Au/Au(x)Ag(1-x), the processing temperature, alloy composition, and alloy thickness resulted in unique and tailorable plasmonic signatures. The discrete dipole approximation and selective alloy etching were used t...

Consider a substitutional solution of two metallic elements A and B. When the alloy is exposed to air at an elevated temperature, A oxidizes, but B does not. In the alloy, the two elements diffuse in opposite directions, but usually at different rates; the nonreciprocal diffusion is known as the Kirkendall effect. At the oxide-alloy interface, metallic atoms may either emit from or inject into ...

Recycling of aluminum alloys often decrease fluidity, consequently influence the castability of the alloy. In this study, the fluidity of Al-Zn alloys, such as the standard A713 alloy with and without scrap addition has been investigated. The scrap added was comprised of contaminated alloy turning chips. Fluidity measurements were performed with double spiral fluidity test consisting of gravity...

The bioactivity and the corrosion protection for a novel nano-grained Ti-20Nb-13Zr at % alloy were examined in a simulated body fluid (SBF). The effect of the SPS's temperature on the corrosion performance was investigated. The phases and microstructural details of the developed alloy were analyzed by XRD (X-ray Diffraction), SEM (Scanning Electron Microscopy), and TEM (Transmission Electron Mi...

Ten dental casting alloys were tested for alloy-element release into cell-culture medium, and this release was related to alloy composition, alloy microstructure, and alloy cytotoxicity (previously determined). Cell-culture medium was analyzed for alloy elements by flame atomic absorption. Concentrations of elements in the medium were normalized by dividing them by their atomic abundance in the...

s The purpose of this study was carried out by the embryotoxicity risk assessment of the dental alloys containing indium. We produced Ag-In alloy, Ag-Pd-Au-Cu alloy and gold alloy for porcelain bonding. For the extraction of these alloy components into the ES-D3 cell culture medium, each alloy was reduced to a powder using a diamond point and sterilized after rinsing. In order to facilitate the...

Electrochemical impedance spectroscopy was used as an in situ technique to determine the average particle size of metal hydride electrodes. Using this, the pulverization of bare and cobalt-encapsulated LaNi Sn alloy was studied as a function of charge–dis4.27 0.24 charge cycles. In the case of bare alloy, pulverization causes an exponential decay in particle size with cycling. Cobalt-encapsulat...