In this paper, the internal resonance characteristics of hyperelastic cylindrical shells under time-varying temperature field are investigated for first time, and evolution isolated bubble is carried out. Through analysis influences on material parameters, strain energy density function in unsteady presented. The governing equations describing axisymmetric nonlinear vibration derived from thin ...

Condition Monitoring of rotating equipment has been a very important aspect in the field of maintenance engineering. There are various types of condition monitoring techniques, namely: Vibration Analysis, Oil Debris Analysis, Ferrography, Temperature analysis. Among all these techniques, vibration analysis have gained much importance in the field of condition monitoring because of its accuracy ...

In the present paper, the modal analysis on a full finite element model of an off-road vehicle. This vehicle was modeled in the CATIA software and then meshed in the HYPERMESH software. The free vibration analysis was conducted by the ABAQUS software. By applying an external displacement, the forced vibration analysis was also performed. As a result, natural frequencies and shape modes were ext...

The Global Magnetorotational Instability (MRI) is investigated for a configuration in which the rotation frequency changes only in a narrow transition region. If the vertical wavelength of the unstable mode is of the same order or smaller than the width of this region, the growth rates can differ significantly from those given by a local analysis. In addition, the non-axisymmetric spectrum admi...

The resonator of a solid-state vibratory gyro is responsible for sensing angular motion. Frequency splitting of an axisymmetric-shell resonator is a common problem caused by manufacturing defects. The defect causes a frequency difference between two working modes which consist of two nodes and two antinodes. The difference leads to the loss of gyroscopic effect, and thus the resonator cannot se...

induction motor bearing is one of the key parts of the machine and its analysis and interpretation are important for fault detection. in the present work vibration signal has been taken for the classification i.e. bearing is healthy (h) or defective (d). for this purpose, clustering based classification of bearing vibration data has been carried out using principal component analysis (pca) and ...

A study of the three-dimensional axisymmetry-breaking instability of an axisymmetric convective #ow associated with crystal growth from bulk of melt is presented. Convection in a vertical cylinder with a parabolic temperature pro"le on the sidewall is considered as a representative model. The main objective is the calculation of critical parameters corresponding to a transition from the steady ...

structural dynamic parameters: natural period, shape modes and damping ratio of vibration, play a decisive role on the seismic behavior of those structures. there are several methods for determining of the structural dynamic parameters, such as: free vibration, ambient vibration and force vibration tests. in this research the structural response of a three-story building (the natural frequencie...

background and aims: whole body vibration (wbv) transmitted to drivers is one of the main reasons for several different symptoms such as musculoskeletal disorders. one of the recommendations to decrease the effects of whole body vibration is using a device that acts as an isolator. in this study, we used an air cushion as a device to decrease wbv. we measured whole body vibration transmitted to...

State-of-the-art axisymmetric drop shape analysis (ADSA) techniques for the computation of interfacial tensions and contact angles by fitting the Laplace equation of capillarity to the shape and dimensions of pendant and sessile drops are presented. More accurate, efficient, and reliable versions of the technique for the measurement of contact angles from the volume and diameter of sessile drop...