Multi-electrode plasma torches are becoming increasingly popular in the thermal spray community due to their good stability and high power plasma jet even when operated with inert gases. Currently the models in use feature either three cathodes and a single anode or three individual anodes connecting to a single cathode. The motivation for development of these plasma torches is based on the inh...

We report on the analysis of the performance of each electrode of an air-breathing passive micro-direct methanol fuel cell (µDMFC) during polarization, stabilization and discharge, with CH3OH (2-20 M). A reference electrode with a microcapillary was used for separately measuring the anode the cathode potential. Information about the open circuit potential (OCP), the voltage and the mass transpo...

Pt-Ru supported on carbon nanotubes (CNTs) (single-walled nanotubes, double-walled nanotubes (DWNTs), and multi-walled nanotubes) catalysts are prepared by an ethylene glycol reduction method. Pt-Ru nanoparticles with a diameter of 2-3 nm and narrow particle size distributions are uniformly deposited onto the CNTs. A simple and fast filtration method followed by a hot-press film transfer is emp...

As promising candidates for next-generation energy storage devices, aqueous rechargeable batteries are safer and cheaper than organic Li ion batteries. But due to the narrow voltage window of aqueous electrolytes, proper anode materials with low redox potential and high capacity are quite rare. In this work, bismuth electrode film was directly grown by a facile hydrothermal route and tested in ...

Current rechargeable batteries generally display limited cycle life and slow electrode kinetics and contain environmentally unfriendly components. Furthermore, their operation depends on the redox reactions of metal elements. We present an original battery system that depends on the redox of I(-)/I3 (-) couple in liquid cathode and the reversible enolization in polyimide anode, accompanied by L...

The current importance of energy emphasizes the use of renewable resources (such as wastewater) for electricity generation by microbial fuel cell (MFC). In the present study, the native sulfate-reducing bacterial strain (R.gh 3) was employed simultaneously for sulfurous component removal and bioelectricity generation. In order to enhance the electrical conductivity and provision of a compatible...

Reduction in size and weight of micro-electronic devices becomes limited by the availability of suitable power sources. This paper presents micro-fabrication routes of an aluminum anode/oxygenated alkaline electrolyte/platinum cathode micro cell as a first step towards the development of highly efficient thin form factor aluminum anode cells. On-demand microfluidic addition of electrolyte can o...

A three-dimensional porous architecture makes an attractive electrode structure, as it has an intrinsic structural integrity and an ability to buffer stress in lithium-ion batteries caused by the large volume changes in high-capacity anode materials during cycling. Here we report the first demonstration of a SnO2-coated macroporous Cu foam anode by employing a facile and scalable combination of...

The gate-controlled diode (or gated diode) is a semiconductor device that combines the function of a p-n junction and a MOS capacitor [1, 2]. The schematic cross-section structure is shown in figure 1. The terminals of the junction are noted A (anode) and K (cathode), while the control electrode is the gate G. The voltage across the p-n junction working in avalanche breakdown regime has the abs...

Ternary spinel NiCo2S4 nanorods are tested for the first time as anode electrodes for Li ion batteries. When the electrode is fabricated using the carboxymethyl cellulose-polyacryl amide composite binder, it is found to restrict or suppress the formation of a polymeric gel passivation layer. As a result, the electrode not only delivers excellent specific capacity, but also an outstanding rate a...