Effective protection of power sources from corrosion is critical in the development of abiotic fuel cells, biofuel cells, hybrid cells and biobateries for implantable bioelectronics. Corrosion of these bioelectronic devices result in device inability to generate bioelectricity. In this paper Al/Au/ZnO was considered as a possible anodic substrate for the development of a hybrid cell. The protec...

A study of the effects of secondary electron emission on charge pulses from a microchannel plate (MCPs) photon counting detector with crossed delay line (CDL) anode readout is presented. The detector is a two-dimensional photon counting detector with fast count rate and good spatial resolution being developed at Los Alamos National Laboratory. The CDL anode is constructed of two orthogonal plan...

Hydrogen production in a microbial electrolysis cell (MEC) can be achieved by either setting the anode potential with a potentiostat, or by adding voltage to the circuit with a power source. In batch tests the largest total gas production (46 3 mL), lowest energy input (2.3 0.3 kWh/m of H2 generated), and best overall energy recovery (sEþS 1⁄4 58 6%) was achieved at a set anode potential of EAn...

The anode electrode material is a crucial factor for the overall performance of a microbial fuel cell (MFC). In this study, a plain carbon paper modified with the CNT/MnO2 nanocomposite was used as the anode for the MFC and a mixed culture inoculum was used as the biocatalyst. The modified anode showed better electrochemical performance than that of plain carbon paper, and Brunauer Emmett Telle...

The location of the geometric center of mass of the anode had a significant effect on power output. At equal position of the geometric center of the anode, larger brushes

Carbon-based anodes are the key limiting factor in increasing the volumetric capacity of lithium-ion batteries. Tin-based composites are one alternative approach. Nanosized Sn-Fe-C anode materials are mechanochemically synthesized by reducing SnO with Ti in the presence of carbon. The optimum synthesis conditions are found to be 1:0.25:10 for initial ratio of SnO, Ti, and graphite with a total ...

Owning to their very high theoretical capacity, lithium metal anodes are expected to fuel the extensive practical applications in portable electronics and electric vehicles. However, unstable solid electrolyte interphase and lithium dendrite growth during lithium plating/stripping induce poor safety, low Coulombic efficiency, and short span life of lithium metal batteries. Lately, varies of mic...

Advances in lithium ion batteries would facilitate technological developments in areas from electrical vehicles to mobile communications. While two-dimensional systems like MoS2 are promising electrode materials due to their potentially high capacity, their poor rate capability and low cycle stability are severe handicaps. Here, we study the electrical, mechanical, and lithium storage propertie...

B. Qu, Prof. T. Wang Key Laboratory for Micro-Nano Optoelectronic Devices of Ministry of Education and State Key Laboratory of Chemo/Biosensing and Chemometrics Hunan University Changsha 410082 , P. R. China E-mail: [email protected] B. Qu, Dr. G. Ji, Dr. C. Xu, Prof. J. Y. Lee Department of Chemical and Biomolecular Engineering National University of Singapore 10 Kent Ridge Crescent 119260 , S...

The operation of PEM fuel cells (PEMFC) with dead-ended anode (DEA) leads to severe voltage transients due to accumulation of nitrogen, water vapor and liquid water in the anode channels and the gas diffusion layer (GDL). Accumulation of nitrogen causes a large voltage transient with a characteristic profile whereas the amount of water vapor in the anode is limited by the saturation pressure, a...