in this work, we studied the effect of carboxylic acid on the rheological properties of a high-alumina cement mortar (ch45) produced by the algerian firm refractal.the investigated properties are setting time, water consumption, electrical conductivity, ph, density and the compressive strength. the results show a setting time of about 200 min for the acid free, 180 min with 0.1 % of carboxylic ...

A study of silica and iron recovery from the iron ore concentration tailing is presented. The residue is composed of 40.1% Fe, 33.4% SiO2, 8.31% Al2O3, 0.08% P, and 0.34% MnO. The developed process of silica and iron recovery consisted of size classification, magnetic separation, and removal of impurities by leaching. A concentration of SiO2 from 33.4% to 67.0%, with 60.0% of mass reduction, wa...

During the refining process of Incoloy825 nickel-based alloy, reaction between slag and Al Ti in alloy can result oxidation loss. Therefore, effect TiO2 Al2O3 contents (CaO–SiO2–Al2O3–MgO–CaF2–TiO2) on final was investigated by slag-metal experiment a 1-kg MoSi2 resistance furnace. The thermodynamic model established based ion molecular coexistence theory kinetic two-film theory. experimental r...

Currently, aluminum oxide stacked with silicon nitride (Al2O3/SiNx:H) is a promising rear passivation material for high-efficiency P-type passivated emitter and rear cell (PERC). It has been indicated that atomic layer deposition system (ALD) is much more suitable to prepare high-quality Al2O3 films than plasma-enhanced chemical vapor deposition system and other process techniques. In this stud...

The introduction of toxic chemicals into the environment can result in water pollution leading to degradation biodiversity as well human health. This study presents a new approach using metal oxides (Al2O3 and SiO2) modified with plasmonic (silver, Ag) nanoparticles (NPs)-based nanofluid (NF) formulation for environmental remediation purposes. Firstly, we prepared Al2O3 SiO2 NFs different conce...

On the basis of RO–Al2O3–SiO2 system, radiotransparent ceramic materials cordierite, celsian, and anorthite composition, which have low dielectric characteristics, are obtained. These requirements met by one main phases BaO–Al2O3–SiO2 system – celsian (BaAl2Si2O8), melting point is 1740 °C, beginning active phase formation occurs at a processing temperature 1300 as well SrO–Al2O3–SiO2 slavsonit...