The present work demonstrates that friction stir welding (FSW) is a feasible route for joining 6061 aluminium (Al) alloy to AISI 1018 steel. The weld has a good weld quality and is free of cracks and porosity. The tensile failure happened at the boundary between the nugget and thermomechanically affected zone of the base Al alloy, indicating that the weld has a higher joining strength. Despite ...

The purpose of the study was evaluation of corrosion resistance of steel 316L used in cardiologic treatment mainly for vascular stents. The study analysed influence of electrochemical and chemical treatment of the steel surface, including sterilisation with pressurised water steam, on its corrosion characteristics. The tests were performed in artificial blood plasma simulating human blood envir...

Hard turning of martensitic stainless steel is gaining importance in all manufacturing sectors like automobile and aerospace industries. Machinability of materials depends on surface roughness, tool wear, cutting forces, specific cutting pressure and work material hardness. In this research hard martensitic stainless steel AISI 440 C and SCM 440 alloy steel was used as work materials. CBN and P...

We have taken advantage of the native surface roughness and the iron content of AISI 316 stainless steel to directly grow multi-walled carbon nanotube (MWCNT) random networks by chemical vapor deposition (CVD) at low-temperature (1000°C) without the addition of any external catalysts or time-consuming pre-treatments. In this way, super-hydrophobic MWCNT films on stainless steel sheets were obta...

Cryogenic treatments are increasingly used to improve the wear resistance of various steel alloys by means of transformation of retained austenite, deformation of virgin martensite and carbide refinement. In this work the nanotribological behavior and mechanical properties at the nano-scale of cryogenically and conventionally treated AISI 420 martensitic stainless steel were evaluated. Conventi...

The effects of boron on the grain boundary and surface energies in iron at 900 and 1000 OC and AISI 316 stainless steel in the temperature range 950-1 250 OC were investigated. It was found that boron reduced these energies in a manner typical of an element with low solubility in the matrix. It has been found that boron improves the grain boundary strength of iron at low temperatures [I] and in...

Due to the complexity and uncertainty in the process, the soft computingmethods such as regression analysis, neural networks (ANN), support vector regression (SVR), fuzzy logic andmulti-gene genetic programming (MGGP) are preferred over physics-based models for predicting the process performance. The model participating in the evolutionary stage of the MGGP method is a linear weighted sum of se...

The joining of a 6-mm thickness Al 6061 to AISI 1018 steel has been performed by the combined effects of fusion and solid state welding. The process is derived from friction stir welding (FSW) but with an adjustable offset of the probe location with respect to the butt line. Metallographic studies by optical microscopy, electron probe microscopy, and the utilization of the X-ray diffraction tec...

In order to produce any product with desired quality by machining, proper selection of process parameters is essential. This can be accomplished by Full Factorial method. The aim of the present work is to investigate the effect of process parameter on surface finish and material removal rate (MRR) to obtain the optimal setting of these process parameters and the analysis of variance is also use...

Hardness of the widely used structural steel is of vital importance since it may help in the determination of many mechanical properties of a material under loading situations. In order to obtain reliable information for design, properties homogeneity should be validated. In the current study the hardness variation over the different diameters of the same AISI 4140 bar is investigated. Measurem...