Much energy is lost through excess air flow in and out of process heating equipment. Energy saving opportunities from managing air flow include minimizing combustion air, preheating combustion air, minimizing ventilation air, and reconfiguring openings to reduce leakage. This paper identifies these opportunities and presents methods to quantify potential energy savings from implementing these e...

in the present work, the simultaneous effects of fuel injection rate and injection of air jet into the combustion chamber on exhaust emissions, combustion process and performance parameters in a direct injection diesel engine were investigated. in order to create an air jet, a design was presented in which a secondary chamber (air cell) was created inside the cylinder and was joined to the main...

There is a demand for reduced power consumption in the vapor compression refrigeration cycle. Coefficient of performance of window-air conditioners considerably decreases and power consumption increases under very hot conditions. These problems have encouragecl studies aimed at improving the performance of window-air-conditioners by enhancing the heat transfer rate in the condenser. In this ar...

In this research, a gas turbine blade cascade was investigated. Flow analysis around the blade was conducted using RSM and RNG.K-ε turbulence modeling and it is simulated by Fluent software. The results were considered for the cases as Mach number loss at the trailing edge of blade caused by vortexes that were generated at the end of blade. Effect of cooling flow through the trailing edge on th...

There is a demand for reduced power consumption in the vapor compression refrigeration cycle. Coefficient of performance of window-air conditioners considerably decreases and power consumption increases under very hot conditions. These problems have encouragecl studies aimed at improving the performance of window-air-conditioners by enhancing the heat transfer rate in the condenser. In this ar...

The air layer formation in a high Reynolds-number flat plate turbulent boundary layer is simulated using a two-phase sharp interface Cartesian grid solver. The interface is tracked by a coupled level set and volume-of-fluid method (CLSVOF) and turbulence is modeled by a Spalart-Allmaras (SA) turbulence model with a wall function (WF) approach. The air layer along the entire test plate is succes...

Many organisms increase the air or water flow adjacent to olfactory surfaces when exposed to appropriate chemical stimuli; such 'sniffing' samples fluid from a specific region and can increase the rate of interception of odorant molecules. We used hot-wire anemometry, high-speed videography and flow visualization to study air flow near the feathery olfactory antennae of male silkworm moths (Bom...

A 3D computational electromagnetic-thermal coupled analysis was performed to analyze the effects of auxiliary cooling fans, called air-gap fans, on winding cooling in a large-capacity, high-speed induction motor. A novel non-uniform iron loss distribution mapping method considering time and rotation period was introduced to provide more accurate thermal modeling. Winding cooling performance in ...