Carbon nanotubes±Fe±Al2O3 massive composites have been prepared by hot-pressing the corresponding composite powders, in which the carbon nanotubes are arranged in bundles smaller than 100 nm in diameter and several tens of micrometers long, forming a web-like network around the Fe±Al2O3 grains. In the powders, the quantity and the quality of the carbon nanotubes both depend on the Fe content (2...

The plasma spray technique has been used by several researchers to deposit nanostructured ceramic coatings, but there is no available literature discussing how to fabricate a bulk, freestanding nanostructured component by such a technique. In the current study, net shape nanostructured Al2O3 structures have been fabricated using the plasma spray technique. A detailed characterization of the spr...

in this research different types of al2o3 were used as supports to prepare catalysts for dehydrogenation of isobutane to isobutene. these supports were al2o3 from merck, axen and gamma al2o3 synthesized from al(oh)3. sn/pt/al2o3 catalysts were prepared by sequential impregnation, at first pt and then sn was deposited. characterization of catalysts was performed by x-ray powder diffraction (xrd)...

Al2O3–Ta2O5 nanolaminate films were prepared via atomic layer deposition (ALD) on silicon with a single overall composition and thickness, but with a varying number of Al2O3/Ta2O5 bilayers. The composition of the films was roughly 57% Al2O3 and 43% Ta2O5 and the total film thickness was held at 58 nm, while the number of bilayers was varied from 3 to 192 by changing the target bilayer thickness...

These are model studies whose aim is to obtain information that would allow development of new technology for synthesizing monolayers of Al2O3-C with adjusted microstructure on cemented carbides. The Al2O3-C layer will constitute an intermediate layer on which the outer layer of Al2O3 without carbon is synthesized. The purpose of the intermediate layer is to block the cobalt diffusion to the sy...

Development of effective electrical magnetohydrodynamic (MHD) coating insulating induced current path is one of key fusion technologies for fusion blanket research and development. Electrical insulation coating is extremely important for lead lithium (PbLi) MHD thermofluid study from pointview of secure electric insulating wall condition. The alumina (Al2O3) coatings fabricated by a sol-gel met...

In a common salt-in-polymer electrolyte, a polymer which has polar groups in the molecular chain is necessary because the polar groups dissolve lithium salt and coordinate cations. Based on the above point of view, polystyrene [PS] that has nonpolar groups is not suitable for the polymer matrix. However, in this PS-based composite polymer-in-salt system, the transport of cations is not by segme...

Tetraplatinum cluster complexes bearing hydrophilic anchors, [Pt4(μ-OCOCH3)4(μ-OCOC6H4OH-4)4] (2a), [Pt4(μ-OCOCH3)4(μ-OCOC6H4B(OH)2-4)4] (2b), and [Pt4(μ-OCOCH3)4(μ-OCOC6H4NH2-4)4] (2c), were successfully prepared by a selective substitution reaction of four in-plane acetates of [Pt4(μ-OCOCH3)8] (1) with the corresponding p-substituted benzoic acids. Solid-state structure determination of 2a re...

A Reusable Interface Technology is presented for application to thermal parameter estimation problems. It is applied to the estimation of thermal conductivity of compacted Al2O3 powder without binder. As temperature increases, the thermal conductivity of Al2O3 powder without binder decreases.

One of the main reactions that can be used to reduce greenhouse gases emissions is Reverse Water Gas Shift (RWGS) reaction. Through this reaction CO2 is converted to CO to produce beneficial chemicals such as methanol. In this paper Mo/Al2O3 catalyst was prepared and then promoted with Ni ions through impregnation method to produce Ni-Mo/Al2O3 catalyst. The structures of the catalysts were stud...