Context. Type III bursts and hard X-rays are both produced by flare energetic electron beams. The link between both emissions has been investigated in many previous studies, but no statistical studies have compared both coronal and interplanetary type III bursts with X-ray flares. Aims. Using events where the coronal radio emission above 100 MHz is exclusively from type III bursts, we revisited...

water is one of the most vital constituents in plants. in this research, for an estimation of leaf moisture content, the variation of capacitance was employed. the variations were measured via designed and manufactured capacitive sensors. the objective of the research was to estimate leaf moisture content by measuring its capacitance for five agronomic crops. experiments for measuring leaf capa...

A search for the body of a victim of terrorist abduction and murder was made in a graveyard on the periphery of a major conurbation in Northern Ireland. The area is politically sensitive and the case of high profile. This required non-invasive, completely non-destructive and rapid assessment of the scene. A MALA RAMAC ground-penetrating radar system was used to achieve these objectives. Unproce...

A multi-layered perceptron neural network with backpropagation algorithm (MLPIBP) is realized as an equalizer for nonreturn-to-zero (NRZ) signal recovery in band-limited channels. It is applied as an adaptive filter to recover the NRZ signal. By computer simulations, the proposed design can recover 100 MHz NRZ data in 10 MHz channel.

We report the generation of squeezed vacuum states of light at 1550 nm with a broadband quantum noise reduction of up to 4.8 dB ranging from 5 MHz to 1.2 GHz sideband frequency. We used a custom-designed 2.6 mm long biconvex periodically-poled potassium titanyl phosphate (PPKTP) crystal. It featured reflectively coated end surfaces, 2.26 GHz of linewidth and generated the squeezing via optical ...

A pseudo-differential fully balanced fully symmetric CMOS operational transconductance amplifier (OTA) architecture with inherent common-mode detection is proposed. Through judicious arrangement, the common-mode feedback circuit can be economically implemented. The OTA achieves a third harmonic distortion of 43 dB for 900 mVpp at 30 MHz. The OTA, fabricated in 0.5m CMOS process, is used to desi...

The aim of the present study was to evaluate the changes in radiofrequency ultrasound local estimator (RULES) images with different instrument settings. An Esaote Technos MPX Color Doppler Ultrasound Machine and RULES were used to capture images of a gallbladder model. The percentages of various colored areas (color filling rates) within the area of interest were calculated using different inst...

The design of a 500 MHz oscillator in a 65 nm CMOS process using a 2 GHz bulk acoustic wave (BAW) resonator is presented. A digital frequency control is implemented using a switched capacitor bank in parallel to the resonator. The tuning range is up to 500 kHz with a minimum step of 200 Hz. The oscillator core uses a differential topology and is designed for low phase noise (2128 dBc/Hz at 100 ...

Interferograms from a dual-comb spectrometer are continuously corrected and averaged in real-time. The algorithm is implemented on a field-programmable gate array (FPGA) development board. The chosen approach and the algorithm are described. Measurements with high signal-to-noise ratio, resolution and bandwidth are shown to demonstrate the accuracy of the optical referencing and the processing ...

The design and construction of inductive voltage dividers (IVDs) for use in impedance bridge applications in the 50 Hz to 1 MHz frequency range is described. Two dividers are described; one designed to operate from 50 Hz to 2 kHz and the other designed to operate from 2 kHz to 1 MHz. Preliminary comparison results of the new IVDs over the 100 Hz to 50 kHz frequency range are given. A new bridge...