حبیب اله طیبی
گروه مهندسی نساجی، دانشگاه آزاد اسلامی، واحد قائمشهر، قائمشهر، ایران
[ 1 ] - تهیه نانوکامپوزیت پلی پیرول/نانوسیلیکا جهت حذف رنگزای اسیدی آبی 62 از محیط‌های آبی: مدل‌سازی با استفاده از سیستم استنباط فازی- عصبی تطبیقی
در این مطالعه نانوذرات سیلیکا از پیش‌ماده تترا اتیل ارتوسیلیکات سنتز شده و سپس نانوکامپوزیت آن با پلیمر پلی پیرول تهیه و به منظور حذف رنگزای اسیدی آبی 62 استفاده گردید. پراش اشعه ایکس به منظور تایید سنتز نانوسیلیکا، میکروسکوپ الکترونی روبشی برای تعیین مورفولوژی سطح، میکروسکوپ الکترونی عبوری برای اندازه‌گیری ذرات نانوسیلیکا سنتز شده و همچنین طیف‌سنج مادون قرمز تبدیل فوریه به منظور تایید و عامل‌د...
[ 2 ] - سنتز نانوکامپوزیت پلی پیرول/نانوسیلیکا و استفاده از آن بمنظور حذف رنگزای راکتیو از محیط های آبی : مطالعات ایزوترم، سینتیک و ترمودینامیک جذب
در این مطالعه نانو ذرات سیلیکا از پیش ماده تترا اتیل ارتوسیلیکات سنتز شده و سپس نانوکامپوزیت آن با پلیمر پلی پیرول تهیه و بمنظور حذف رنگزای راکتیو قرمز 198 استفاده گردید. میکروسکوپ الکترونی روبشی برای تعیین مورفولوژی سطح، میکروسکوپ الکترونی عبوری برای اندازه گیری ذرات نانو سیلیکا سنتز شده وهمچنین طیف سنج مادون قرمز تبدیل فوریه به منظور تایید و عامل دار شدن نانوذرات سیلیکا با پلیمر پلی پیرول اس...
[ 3 ] - Investigation of Acid Blue 62 Dye Adsorption using SBA-15/Polyaniline Mesoporous Nanocomposite: Kinetic and Thermodynamic Study
Background and Purpose: This study aimed to investigate the adsorption of Acid Blue 62 (AB62) as an anionic dye from aqueous solution onto as SBA-15/Polyaniline (SBA-15/PAni) mesoporous nanocomposite a low-cost adsorbent and feasible. Materials and Methods: Fourier transform infra-red spectroscopy (FTIR), Filed Emission Scanning Electron Microscope (FESEM), Transmission Electron Microscope (TE...
[ 4 ] - Comparison of different kinetic models for adsorption of acid blue 62 as an environmental pollutant from aqueous solution onto mesoporous Silicate SBA-15 modified by Tannic acid
In this work, adsorption kinetics were investigated in order to remove the acid blue 62 off the aqueous solutions using mesoporous silicate SBA-15 loaded with tannic acid (tannin-SBA-15). Nitrogen adsorption and desorption test (BET), X-ray diffraction (XRD) and Fourier transform infra-red spectroscopy (FT-IR) analysis characterize synthesized composite. The impacts of some parameters such as P...
[ 5 ] - Synthesize and characterization of Aminosilane functionalized MCM-41 for removal of anionic dye: Kinetic and thermodynamic study
In this study, removal of Acid blue 62 from aqueous solution by mesoporous silicate MCM-41 modified by Aminopropyltriethoxysilane (APTES) composite was studied. Properties of synthesized composite were analyzed and confirmed by SEM, EDX and FTIR. Results show that Langmuir adsorption isotherm has the best compatibility with the results of experiments. Kinetic analysis using pseudo-first-order m...
[ 6 ] - CO2 adsorption on the surface and open ended of Single wall carbon nanotubes (SWCNTs): A Comparative study
Adsorption of CO2 on the surface of Single-wall zigzag (5,0) and armchair (4,4) carbon nanotubes (SWCNTs) were studied through using density functional theory (DFT) calculations. Optimizations of geometric were performed at the B3PW91 level of 6-311++G** method standard basis set using GAUSSIAN 03 package of program [1]. Structural models were optimized and adsorption energies, band gap, charge...
[ 7 ] - Polypropylene /Polystyrene in situ nano reinforced blends fiber: Morphology and properties
Polypropylene / polystyrene blends containing montmorillonite (MMT) were prepared using a twin screw extruder followed by fiber spinning. The melt intercalation of PP and PS alloys was carried out in the presence of a compatibilizer such as maleic anhydride-g-polypropylene (MPP). The crystallization morphology, thermal behaviors and mechanical properties of polypropylene/polystyrene (PP/PS) nan...
[ 8 ] - Adsorption of Acid Dyes on Modified Mesoporous SBA-15: Comparison of Two Dyes
In this study, SBA-15-PAMAM mesoporous Nano-adsorbent was synthesized, characterized and applied for adsorption of Acid dyes (Acid Blue 62 (AB62) and Acid Red 266 (AR266)) from aqueous Medias. Adsorption of AB62 and AR266 on SBA-15 ordered mesoporous silica, polyamidoamine functionalized SBA-15(SBA-15-PAMAM), has been investigated. In order to assess the synthesized adsorbent constructional, FT...
[ 9 ] - Physical Chemistry Studies of Acid Dye Removal from Aqueous Media by Mesoporous Nano Composite: Adsorption Isotherm, Kinetic and Thermodynamic Studies
In this research, SBA-15/Polypyrrole (SBA-15/PPy) mesoporous nanocomposite was synthesized, characterized and applied for Acid Blue 62 (AB62) adsorption as a textile dye from aqueous solution. In order to evaluate the structural properties of synthesized adsorbent, FT-IR, FESEM and TEM images, XRD, and BET techniques were applied. Some parameters such as pH, dosage, and time which affect the ba...
[ 10 ] - Comparison of different kinetic models for adsorption of acid blue 62 as an environmental pollutant from aqueous solution onto mesoporous Silicate SBA-15 modified by Tannic acid
In this work, adsorption kinetics were investigated in order to remove the acid blue 62 off the aqueous solutions using mesoporous silicate SBA-15 loaded with tannic acid (tannin-SBA-15). Nitrogen adsorption and desorption test (BET), X-ray diffraction (XRD) and Fourier transform infra-red spectroscopy (FT-IR) analysis characterize synthesized composite. The impacts of some parameters such as P...
[ 11 ] - Synthesize and characterization of Aminosilane functionalized MCM-41 for removal of anionic dye: Kinetic and thermodynamic study
In this study, removal of Acid blue 62 from aqueous solution by mesoporous silicate MCM-41 modified by Aminopropyltriethoxysilane (APTES) composite was studied. Properties of synthesized composite were analyzed and confirmed by SEM, EDX and FTIR. Results show that Langmuir adsorption isotherm has the best compatibility with the results of experiments. Kinetic analysis using pseudo-first-order m...
[ 12 ] - CO2 adsorption on the surface and open ended of Single wall carbon nanotubes (SWCNTs): A Comparative study
Adsorption of CO2 on the surface of Single-wall zigzag (5,0) and armchair (4,4) carbon nanotubes (SWCNTs) were studied through using density functional theory (DFT) calculations. Optimizations of geometric were performed at the B3PW91 level of 6-311++G** method standard basis set using GAUSSIAN 03 package of program [1]. Structural models were optimized and adsorption energies, band gap, charge...
[ 13 ] - Polypropylene /Polystyrene in situ nano reinforced blends fiber: Morphology and properties
Polypropylene / polystyrene blends containing montmorillonite (MMT) were prepared using a twin screw extruder followed by fiber spinning. The melt intercalation of PP and PS alloys was carried out in the presence of a compatibilizer such as maleic anhydride-g-polypropylene (MPP). The crystallization morphology, thermal behaviors and mechanical properties of polypropylene/polystyrene (PP/PS) nan...