عبداله ایران خواه

هیئت علمی/دانشگاه کاشان

[ 1 ] - کاتالیزور‌های فرآیند کلاوس بهبود یافته برای بازیابی گوگرد

امروزه تأکید بر ایمن بودن محیط های عملیاتی واحد بازیابی گوگرد به لحاظ زیست‌محیطی می باشد. کاتالیزور‌های مورداستفاده در رآکتورهای این واحد می توانند سهم مهمی در کنترل و کاهش گازهای آلاینده داشته باشند. اگر نوع کاتالیزور‌های انتخابی و نحوه چینش آن‌ها در رآکتور به‌گونه‌ای باشد که تبدیل بیشینه باشد در این صورت میزان گازهای آلاینده H2S و SO2 در جریان خروجی از واحد به‌طور قابل‌توجهی کاهش می یابد. در ...

[ 2 ] - Optimization of Preparation Factors for Cerium Oxide Synthesis as a Support for CO PrOx Catalyst

Nanocrystalline ceria has been considered as support for carbon monoxide preferentially oxidation. In this study ceria was prepared by precipitation method and the effects of preparation conditions, such as pH of solution (8-10), aging time (1-12 hr), drying temperature (80-120 °C), calcination time (2-6 hr) and temperature (400-600 °C) were investigated on ceria synthesized powders properties....

[ 3 ] - Effect of platinum on Ceria supported Cu catalysts for PrOx process in fuel processors

The CO preferential oxidation (PrOx) is one of the critical steps in hydrogen production and purification for Polymer Electrolyte Membrane Fuel Cell (PEMFC). This reaction was investigated in the presence of excess hydrogen over Cu/CeO2, Pt/CeO2 and Cu-Pt/CeO2 catalysts. The ceria supports was prepared via precipitation method and Cu-Pt/CeO2 catalyst was synthesized by sequential impregnation o...

[ 4 ] - هیدروژناسیون ترکیب Mg-Ni آسیاب شده‌

Magnesium hydride is one of the hydrogen storage materials in solid state that is taken into consideration due to its high storage capacity. This paper investigates the adsorption of magnesium and nickel catalyst combination in 473 K at 2.0 and 3.5 Mpa. A planetary ball mill is used in order to produce fine particles and to increase adsorption. A volumetric method (Sievert) is used for hydrogen...

[ 5 ] - Methanol Steam Reforming Catalyzing over Cu/Zn/Fe Mixed Oxide Catalysts

Methanol steam reforming plays a pivotal role to produce hydrogen for fuel cell systems in a low temperature range. To accomplish higher methanol conversion and lower CO production, the reaction was catalyzed by CuZnFe mixed oxides. Various ratios of Fe and Cu/Zn were coprecipitated in differential method to optimize the CuZnFe structure. The sample containing 45Cu50Zn5Fe (Wt. %) revealed its m...

[ 6 ] - Effect of Pt on Zn-Free Cu-Al Catalysts for Methanol Steam Reforming to Produce Hydrogen

Steam reforming of methanol can be considered as an attractive reaction aiming at hydrogen production for PEM fuel cells. Although Cu/Al-contained catalysts are considerably evaluated in this reaction, further evaluation is essential to evaluate the impact of some promoters like Pt in order to find a comprehensively optimized catalyst. Pt promoter is employed with different methods in this ...

[ 7 ] - Effect of MgAl2O4 catalyst support synthesis method on the catalytic activity of nickel Nano catalyst in reverse water gas shift reaction

In this research effect of synthesis method of magnesium aluminate as support of Ni catalysts at the reverse water gas shift (RWGS) reaction was evaluated. The RWGS reaction is applied in Carbon Dioxide Hydrogenation to Form Methanol via a Reverse Water-Gas Shift Reaction (CAMERE) process for the transformation of CO2 into methanol. The MgAl2O4 supports were prepared by sol-gel (M1), surfactant...