M. Mohammadi

[ 1 ] - Air Plasma Sprayed Bond Coat Oxidation Behavior and its Resistance to Isothermal and Thermal Shock Loading

An experimental investigation was conducted to find the effect of spraying method of coating of Thermal Barrier Coatings (TBCs) on their oxidation behaviour and resistance to various thermal loading. Isothermal and thermal shock tests were performed in order to study oxidation behaviour of air plasma sprayed Bond Coat (BC) and assess its effect on TBCs lifetime under the stated loadings. Specim...

[ 2 ] - Subcritical Water Extraction of Bioactive Compounds from Ginger (Zingiber officinale Roscoe)

Ginger is one of the commonly used spices that has been exhibited to have pharmaceutical activities. These therapeutic properties are mainly attribute to gingerols and shogaols. To extract these bioactive compounds, subcritical water extraction (SWE) was employed as a green method. The influence of adding co-solvents, temperature, retention time and particle size on extraction yield were invest...

[ 3 ] - Buckling Analysis of Thin Functionally Graded Rectangular Plates with two Opposite Edges Simply Supported

In this article, an exact analytical solution for thermal buckling analysis of thin functionallygraded (FG) rectangular plates is presented. Based on the classical plate theory and using the principle ofminimum total potential energy, the stability equations are obtained. Since the material properties in FGmaterials are functions of the coordinates (specially the thickness), the stability equat...

[ 4 ] - Local and Global Friction Factor in a Channel with V-Shaped Bottom

This paper presents an experimental research on the distribution of local friction factor, fb, and global friction factor, f, over the cross-section of a channel with V-shaped bottom, which typically occurs in sewers and culverts. Several series of experiments were conducted for measuring velocity and boundary shear stress. It is found that, Darcy-Weisbach, f, is more sensitive than other resis...

[ 5 ] - Spatially Varied Flow Profiles in a V-Shaped Side-Channel

[ 6 ] - Resistance to Flow in a V-Shaped Bottom Channel

Water flow in open channels is always subject to the resistance to flow and energy dissipation. For design purposes, one of the needed variables is the hydraulic resistance coefficient. For this mean, the influence of cross-sectional shape together with secondary flow cells and lateral distribution of true boundary shear stress have not yet been fully explored. This paper surveys the number of ...

[ 7 ] - An Experimental Investigation of Bridgeflow II Kerb Channel Units

The results of an experimental investigation of kerbside bridge deck drainage units are presented. The conveyance capacity, resistance coefficients and sediment transporting efficiencies of different types of drainage unit used in shallow bridge drainage decks are examined over a range of bed gradients likely to be encountered in practice. The use of a V-shaped cross section is shown to be part...

[ 8 ] - Shape Effects and Definition of Hydraulic Radius in Manning 's Equation in Open Channel Flow

In the Manning equation the hydraulic radius can be defined as the cross-section dimension of the shape. In pipe flow the bed shear stress is assumed to be uniformly distributed along the wetted perimeter which cannot be true in open channel flow. Hence, three approximation of the true boundary shear-stress distribution are examined and more practical conveyance depth or resistance radius formu...