E. Shekarian
Department of Chemical Engineering, College of Engineering, Azadshahr Branch, Islamic Azad University, Azadshahr, Iran.
[ 1 ] - Preparation and characterization of nano-porous Polyacrylonitrile (PAN) membranes with hydrophilic surface
Polyacrylonitrile (PAN) membranes with nano-porous surface and high hydrophilicity were fabricated by addition of polyoxyethylene (40) nonylphenyl ether (IGEPAL) as an additive in the casting solution. The membranes were prepared from PAN/IGEPAL/1-Methyl-2-pyrrolidone (NMP) via phase inversion induced by immersion precipitation technique. Pure water was used as coagulation medium. The effects o...
[ 2 ] - Preparation and characterization of nano-porous Polyacrylonitrile (PAN) membranes with hydrophilic surface
Polyacrylonitrile (PAN) membranes with nano-porous surface and high hydrophilicity were fabricated by addition of polyoxyethylene (40) nonylphenyl ether (IGEPAL) as an additive in the casting solution. The membranes were prepared from PAN/IGEPAL/1-Methyl-2-pyrrolidone (NMP) via phase inversion induced by immersion precipitation technique. Pure water was used as coagulation medium. The effects o...
[ 3 ] - Enhanced wettability and electrolyte uptake of coated commercial polypropylene separators with inorganic nanopowders for application in lithium-ion battery
In this research, inorganic material type and content influence on coating of commercially available polypropylene (PP) separator were studied for improving its performance and safety as lithium ion battery separator. Heat-resistant nanopowders of Al2O3, SiO2 and ZrO2 were coated using polyvinylidene fluoride (PVDF) binder. Coating effects on the separators morphology, wettability, high tempera...
[ 4 ] - بررسی تأثیر فناوری‌های جدید بهبود انتقال گرما در طراحی مبدل‌های گرمایی پوسته- لوله‌ای
با وجود مزایای مبدل های پوسته- لوله ای، پائین بودن بازده گرمایی، از بزرگترین مشکلات این دستگاه های تبادل گرمایی محسوب می شود. در این مقاله تلاش می‌شود تا با ارائه الگوریتمی ساده به صورت کمی تاثیر فناوری های جدید بهبود انتقال گرما در طراحی مبدل های گرمایی پوسته- لوله ای بررسی شود. برای این منظور، ابتدا خواص گرمایی (ناسلت) و ضریب اصطکاک سیال خالص، نانوسیال آب- آلومینیم اکسید و لوله در حالت استفاد...
نویسندگان همکار