وحید دادمهر
دانشگاه الزهرا
[ 1 ] - ساخت و بررسی رفتار دی الکتریکی زئولیت Y
در این تحقیق ضمن ساخت زئولیت Yاز روش هیدروترمال و مشخصه‌یابی آن توسط XRD و FTIR ، خواص دی‌الکتریکی زئولیت Yکه یک ترکیب از دسته زئولیت‌های مصنوعی و دارای ساختار Faujasite است مورد بررسی قرار گرفت. نتایج حاصل از تحلیل الگوی پراش اشعه X با استفاده از نرم‌افزار X'Pert تشکیل زئولیت Y را تایید کرد. ویژگی‌های دی‌الکتریکی نمونه با اندازه‌گیری ضرایب دی‌الکتریک 'ε واتلاف "ε بررسی شد و رفتار فرکانسی- دمای...
[ 2 ] - اثر آلایش Ni و Fe بر ناهنجاری هال در حالت گردشاره‌ای نمونه‌های آلاییده YBCO
We have investigated hall effect on YBa2Cu3-xMxO7-δ (M=Ni, Fe) bulk samples, with dopant amount 0 ≤ x ≤ 0.045 for Ni and 0 ≤ x ≤ 0.03 for Fe, with magnetic field (H=2.52, 4.61, 6.27 kOe) perpendicular to sample’s surface with constant current 100 mA. Our study shows that as both dopants increases, TC decreases and it decreases faster by Ni . In these ranges of dopant and magnetic field the Hall...
[ 3 ] - نانو فیلامانها(CNT & CNF) و ترکیب ابررسانای 123
The effects of carbon nano filaments on the superconducting properties of Y-123 compound were studied. Samples were synthesized using standard solid-state reaction technique by adding CNT up to 1 wt %. The XRD data confirm the single phase orthorhombic structure for all the samples. The SEM of samples shows existence of CNTs which can powered the weak links that increase the . We obtained cha...
[ 4 ] - اثر آلایش Ni و Fe در ترکیب ابررسانای YBCO ساخته شده به روش سل ـ ژل
We fabricated YBa2Cu3-xMxO7- d (M=Ni, Fe) bulk samples, with stochiometric amount 0≤x≤0.045 by sol-gel method. The phase analysis and microstructure of specimens were examined by XRD and SEM. The electrical resistivity was measured using standard four probe technique for 77-300K. Investigation of XRD spectrum by MAUD shows Ni and Fe ions substitute in Cu(2) and Cu(1) site, respectively. Transi...
[ 5 ] - خواص ساختاری و ابررسانایی نمونه‌های (YBa2Cu3-xMxOy (M=Ag, Al
Samples of YBa2Cu3-xAgxOy with x=0, 0.1, 0.15, 0.2, 0.3 and samples of YBa2Cu3-xAlxOy with x=0, 0.01, 0.02, 0.03 and 0.045 are prepared by the sol-gel method. Structural and superconducting properties of samples are studied by electrical resistivity (R-T), X-ray diffraction (XRD) and scanning electron microscopy (SEM). All the samples show transition to superconducting state and the transitio...
[ 6 ] - Josephson Current For a Graphene Nanoribbon Using a Lattice Model
A tight binding approach based on the Bogoliubov-de Gennes approach has been used to calculate the DC Josephson current for a lattice model for S-GNR-S junctions , for short junctions with respect to superconducting coherence length. We calculate the phase, length, width and chemical potential dependence at the Josephson junction and discuss the similarities and differences with regard to the t...
نویسندگان همکار