سوری, حسین
دانشگاه صنعتی مالک اشتر
[ 1 ] - مروری بر معادلات حالت مواد منفجره نسوخته
For simulation and analysis of detonation in explosive materials, we need to use equation of state (EOS) for closing of the governing equations. In high explosives, the EOS is divided into two categories, EOS of detonation products and unreacted materials. Most of the explosion specialists are familiar with EOS of detonation products. Therefore, this paper is about introducing and investigating...
[ 2 ] - شبیه سازی آزمون ایمپالس متری VLIP و ارائه روشی برای تعیین معادل TNT انفجاری
The VLIP is a usefull system to compare the high explosives efficiency. This device includes a metallic plate which located above the explosive material and upthrown vertically due to the explosion. The exerted impulse on the plate is used as a meter to determine the explosives efficiency. Since the VLIP system has a low cost, in this paper a method based on VLIP is presented to determine the T...
[ 3 ] - اثر افزودنی‌های کاهش‌دهنده ویسکوزیته بر فرآیند پذیری مواد منفجره پلیمری
The purpose of this paper is to review the effect of polymer additives on the final viscosity of PBX slurry and viscosity reduction mechanism. Variables related to the formulation and manufacturing process affects PBX viscosity. PBX viscosity directly affects the process of mixing and charging of these materials and hence it is necessary that the viscosity values to be low in order to facilitat...
[ 4 ] - تحلیل و طراحی مکانیزم جهش خارج از مرکز نارنجک جهنده
The presently available tear gas grenades used for controlling riot, have certain disadvantages like ability to re launching from rioters due to combustion at low temperature. More over on account of their considerable weight and volume, it was found difficult to transport sufficient number of them. In this regard, making a small grenade free from such disadvantages and to be mobile or gliding ...
[ 5 ] - پیش‌بینی تأثیر انفجارهای داخلی متوالی بر مقاومت یک اتاقک آزمون ساخته شده از بتن مسلح
One of the regular tests used for designing explosive materials for internal explosion is doing the explosion in a closed or partially closed environment to detect and analyzing the blast wave parameters. In this regard, the test so-called two- room test is considered among researchers. The test is performed in two reinforced concrete- built rooms which are connected by a door. The explosive ma...