شاه طاهری, سید جمال الدین
دانشگاه علوم پزشکی تهران، دانشکده بهداشت
[ 1 ] - کاربرد روش استخراج فاز جامد و جاذب XAD-4 جهت تعیین مقدار کادمیوم در نمونه های مو و ناخن کارگران یک صنعت فلزی
Background and aims: Cadmium is a common industrial and environmental contaminant causing adverse health effects on respiratory system and kidney. This has been classified as a human carcinogen. Biological monitoring of cadmium and its measurement in urine, hair, and nail samples can be considered as an evaluation of the internal dose. Because of trace concentration of analytes in biological sa...
[ 2 ] - بررسی خصوصیات نانو کامپوزیتXNBR جهت ساخت دستکش‌های حفاظتی
Background & Objectives: Dermal exposure to chemical agents can result in a variety of occupational diseases and disorders, including occupational skin diseases and systemic toxicity . T he present paper focused on transport properties of nanocomposite based on carboxylated nitrile butadiene rubber (XNBR)-nanoclay. Methods: In this study, XNBR gloves nanocomposite were prepared a...
[ 3 ] - طراحی و ساخت یک سنسور الکتروشیمیایی با ویژگی اندازه گیری دیازینون در پایش‌های محیطی و بیولوژیکی
Diazinon is commonly used for pest control in the agricultural fields because of its relatively low cost and high efficiency. Due to the increasing application of pesticides, reliable and accurate analytical methods are necessary for their monitoring. This work was aimed to design the high selective electrochemical sensor for determining of diazinon in biological and environmental samples. The ...
[ 4 ] - ارزیابی بیولوژیکی مواجهه کارگران با فلزات سمی نیکل و سرب با استفاده از روش فاز جامد با جاذب کرموزورب 102
Background and Aim: The aim of this study was to assess exposure of workers in a metal industry to nickel and lead. Materials and Methods: Extraction was done using the solid-phase extraction on Chromosorb-102 resin to prepare, concentrate and purify biological samples of urine, hair and nails of workers working in metal industries. The variables influencing response (pH, loading flow rat...
[ 5 ] - Fabrication and Optimization of Molecularly Imprinted Nanofibers in Assessment of Occupational Exposure to 5-fluorouracil
Background and purpose: Cytotoxic drugs are a group of chemicals that raise concerns over the health of healthcare professionals. Therefore, accurate methods are needed to investigate the traces of these drugs. This study was done to fabricate and optimize molecularly imprinted membrane as a specific absorbent in assessment of occupational exposure to 5-fluorouracil. Materials and methods: 5-F...
[ 6 ] - Developing Preparation Methods for Biological Samples to Determine Trace Amounts of Heavy Metals: A Review Study
Introduction: Perpetration of samples is one of the most important stages needed for trace residue analysis of biological specimens when human exposure assessment is required. The samples preparation process makes the analyte get more purified and enriched as well as more compatible to the analysis instrument systems. The present study has concentrated on a systematic review of different articl...
نویسندگان همکار