Mohammad Talafi Noghani
Department of Materials Science and Engineering, Faculty of Engineering, Imam Khomeini International University, Qazvin, Iran
[ 1 ] - Effect of processing parameters on the mechano-chemical synthesis of nano crystalline Mo-Cu/Al2O3 composite
In this study, molybdenum-copper/alumina nano composite was synthesized with mechano-chemical method using high energy planetary ball milling. The molybdenum oxide, copper oxide and aluminum powder were used as starting materials and reaction appeared to occur through a rapid combustion reaction process. The evaluation of powder particles after different milling times was studied by X-ray diffr...
[ 2 ] - بررسی خواص باکتری کشی آلیاژ نانوکریستالی مس – قلع تولید شده از مواد اولیه اکسیدی و فلزی به روش آلیاژسازی مکانیکی
هدف از انجام این پژوهش تولید آلیاژ مس- قلع به روش آلیاژسازی مکانیکی و بهبود حد حلالیت مس و قلع و در نهایت بررسی خاصیت ضدباکتری آلیاژ تولید شده میباشد. تولید این آلیاژ بوسیله آسیاب سیاره ای و گلوله هایی از جنس آلیاژهای نیکل – کروم ( ۸۰ درصد نیکل و ۲۰ درصد کروم) با 35 و 50 و 83 درصد مس انجام شده و خاصیت باکتری کشی توسط دستگاه آزمون چگالی نوری بررسی شد. نتایج نشانگر این بود که با استفاده از روش آ...
[ 3 ] - Synthesis of Aluminum- CNTs Composites Using Double-Pressing Double-Sintering Method (DPDS)
Metal matrix composite (MMC) is engineered combination of the metal (matrix) and hard particle (reinforcement) to get tailored properties. MMCs are either in use or prototyping for the space shuttle, commercial airliners, electronic substrates, automobiles, golf clubs, and a variety of other applications.In this study, carbon nanotubes (CNTs) reinforced aluminum MMCs were synthesized by DPDS fo...
[ 4 ] - Hydrogen evolution activity of NiMo-MoO2 produced by mechanical milling
In this study, mechanical alloying was done by a high-energy planetary ball milling technique. A mixture of NiO and MoO3 and graphite powders were used as initial materials. After milling of powder mixture with 40 wt.% additional graphite, a temperature of 400, 550 and 1000 °C for 1 h was considered for the heat treatment of powder mixture. Also, powder mixtures containing 60, 80 and 100 wt.% a...
[ 5 ] - Investigation of the effect of electrolyte on acoustical behaviour of ceramic coatings produced by method Plasma Electrolytic Oxidation (PEO) on titanium
In this paper, titanium oxide coating (TiO2) was produced on titanium alloy Ti6Al4V by Plasma Electrolytic Oxidation (PEO) Method. Sodium Silicate (Na2SiO3) and Sodium Aluminate (NaAlO2) based electrolytes were selected in PEO process. The effects of concentration of Sodium Aluminate (0, 2.5, 5, 7.5, and 10 g/L) on the microstructure and acoustical behaviour of the formed coatings were studied....
[ 6 ] - Acoustic damping performance of aluminum nanocomposite foams with different additive of carbon nanotubes and comparison that with conventional rockwool (Research Article)
Open cell aluminum foams have good acoustic dampening properties. In this research, in order to improve the sound damping capacity of these foams, 0.9, 1.5 and 3wt% carbon nanotubes were added to the aluminum foam. Foams were produced by the space holder method in powder metallurgy. The results showed that Al-0.9wt%CNT nanocomposite foam had the highest average sound transmission loss in the fr...
نویسندگان همکار