Mohammad Yousefi
Department of Chemistry, Science and Research Branch, Islamic Azad University, Tehran, Iran
[ 1 ] - Synthesis of NiFe2O4/sawdust nanocomposite for oil-water separation
organic solvents. In this study, NiFe2O4/sawdust nanocomposite was synthesized for removingoil pollutants. The oil-adsorbing nanocomposite could be easily separated from water bymagnet bar. The XRD results show tetragonal phase proving the composite formation. TheFESEM pictures successfully reveal the growth of NiFe2O4 on the sawdust template. The FTIRbands at 422 cm-1 and 615 cm-1correspond to...
[ 2 ] - Synthesize and Characterization of Hollow and Core/Shell Based on CeO2 as a Alcohol Sensor
In this study, CeO2 hollow spherical nanoparticles, CeO2/SiO2 @ CeO2 core/shell composites,and hollow CeO2/SiO2 sensors were synthesized and their microstructures were researched byFT-IR, XRD, FESEM, EDX and BET analyses. The peaks observed in the FT-IR spectra of the synthesizedsamples corresponded to Ce-O stretching vibration (ca. 566 cm-1) and O-Si-O bendingvibration (ca. 470 cm-1). XRD diff...
[ 3 ] - Influence of synthesis parameters on the properties of nanostructured γ-Alumina using plackett-burman experimental design
Mesoporous nanostructured γ-Al2O3 powders were synthesized through multi- step precipitation procedures using the pH-swing technique. Structural and morphological characteristics in addition to the thermal behavior of the procured samples were characterized via X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), fourier transform infrared (FT-IR) ...
[ 4 ] - Sol-gel synthesis, characterization, optical properties and catalytic performance of Y2Ce2O7 nanomaterial
Y2Ce2O7 nano powders were synthesized via sol-gel reactions at 900 (S1), 1000 (S2) and 1100 (S3) ˚C for 4 h using yttrium acetate (C6H9O6Y.xH2O), ammonium cerium nitrate ((NH4)2Ce(NO3)6) and stearic acid (C18H36O2</s...
[ 5 ] - تهیه، شناسایی و بررسی ویژگیهای مغناطیسی و جذب مایکروویو نانوچندسازه پلیآنیلین/ SrFe11.1(Zn0.5Co0.5Zr)0.45O19/اMWCNTs
در این پژوهش، ابتدا نانوذرههای استرانسیم هگزافریت دوپهشده با کاتیونهای +Zn2+،Co2+،Zr4 و فرمول SrFe11.1(Zn0.5Co0.5Zr)0.45O19 بهروش سلژل خوداحتراقی تهیه، سپس نانوچندسازه سهجزئی پلیآنیلین/ SrFe11.1(Zn0.5Co0.5Zr)0.45</sub...
[ 6 ] - Electromagnetic absorption and structural properties of SrFe11.98Mg0.1Sn0.1O19/BaTiO3 nanocomposites
In this research, first, nanoparticles of SrFe11.98Mg0.1Sn0.1O19 hexaferrite was synthesized via sol-gel auto-combustion process and then the nanocomposites of hexagonal ferrites/perovskite with the amounts of SrFe11.98Mg0.1Sn0.1O19/BaTiO3 (50/50, 40/60, 70/30 w/w) was prepared by the ball-milling...
[ 7 ] - Influence of synthesis parameters on the properties of nanostructured γ-Alumina using plackett-burman experimental design
Mesoporous nanostructured γ-Al2O3 powders were synthesized through multi- step precipitation procedures using the pH-swing technique. Structural and morphological characteristics in addition to the thermal behavior of the procured samples were characterized via X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), fourier transform infrared (FT-IR) ...
[ 8 ] - Sol-gel synthesis, characterization, optical properties and catalytic performance of Y2Ce2O7 nanomaterial
Y2Ce2O7 nano powders were synthesized via sol-gel reactions at 900 (S1), 1000 (S2) and 1100 (S3) ˚C for 4 h using yttrium acetate (C6H9O6Y.xH2O), ammonium cerium nitrate ((NH4)2Ce(NO3)6) and stearic acid (C18H36O2</s...
[ 9 ] - Removal of Cd2+ from Aqueous Solution by Nickel Oxide/CNT Nanocomposites
The present work investigates the efficiency of the nickel oxide/carbon nanotube (NiO/CNT) nanocomposite for the removal of Cd2+ metal ions from an aqueous. The NiO/CNT nanocomposite was synthesized by the direct co-precipitation method in an aqueous media in the presence of CNTs. The resulting materials were characterized by FT-IR, XRD, SEM, N2 adsorption-desorption</em...
[ 10 ] - Solvent influence on the interaction of cis-PtCl2(NH3)2 complex and graphene: A theoretical study
In this study the interaction of cis-PtCl2(NH3)2 complex and graphene were investigated with MPW1PW91method in gas and solvent phases. The solvent effect was examined by the self-consistent reaction fieldtheory (SCRF) based on Polarizable Continuum Model (PCM). The selected solvents were chloroform,chlorobenzene, bromoethane, dimethyldisulfide, and dichloroethane. The solvent ...
[ 11 ] - Magnetic and microwave absorption properties of barium hexaferrite doped with La3+ and Gd3+
In this paper, BaLaxGdxFe12-2xO19 (x=0.2, 0.4, 0.6 and 0.8) were synthesized via sol-gel auto-combustion method. Fourier transform infrared spectroscopy (FTIR) of samples was represented that the bands at 400 and 500 cm-1 were related to the formation of hexaferrite phase. The (x-ray diffraction) XRD patterns were matched exactly with the structure of barium hexaferrite. (Field emission scanni...
[ 12 ] - Combine flake like magnesium hydroxide and cubic like aluminum hydroxide nanostructures in order to improve fire retardant of PVC and PMMA
In this study, Flake-like magnesium hydroxide (Mg(OH)2) and cubic-like aluminum hydroxide (Al(OH)3) nanostructures were synthesized via a simple co-precipitation method at relatively low temperature. Chemical properties and surface morphology of the magnesium hydroxide and aluminum hydroxide were characterized by X-ray diffraction analysis (XRD), scanning electron microscopy image (SEM), transm...
[ 13 ] - Adsorption and photodegrading of Methylene Blue by using of BaLaxGdxFe12-2xO19 (x=0.2, 0.4, 0.6 and 0.8)/PANI nanocomposites
In this paper, a series of BaLaxGdxFe12-2xO19 (x=0.2, 0.4, 0.6 and 0.8)/PANI (polyaniline) nanocomposites synthesized for investigating the photocatalytic properties. Barium hexaferrite doped with La3+ and Gd3+ prepared via a sol-gel auto-combustion method and then the binary nanocomposites fabricated by the in situ polymerizati...
[ 14 ] - Synthesis and characterization ZnFe2O4@MnO and MnFe2O4@ZnO magnetic nanocomposites: Investigation of photocatalytic activity for the degradation of Congo Red under visible light irradiation
In the present investigation, ZnFe2O4@MnO and MnFe2O4@ZnO magnetic nanocomposites were fabricated via a facile hydrothermal method and were calcined at 300 °C for 3 h. Synthesis of ZnFe2O4@MnO and MnFe2O4@ZnO magnetic nanocomposites optimized by the different weight percentages. The synthesized photocatalyst...
نویسندگان همکار