Javad Jafari Fesharaki

[ 1 ] - Numerical/Experimental Analysis of the Deformation of Tubes under Concentrated Load

Distortion and deformation of tubes during machining operations are very important. In this study, a tube used in magnetic drum separator under concentrated load (machining load) is considered. Using finite element simulation, deformities and their dependence on parameters such as the thickness of the tube and the place of concentrated force are observed and predicted. To compare and confirm th...

[ 2 ] - Investigating the Effect of Stiffness/Thickness Ratio on the Optimal Location of Piezoelectric Actuators Through PSO Algorithm

This article has studied the effect of ratio of stiffness and thickness between piezoelectric actuators and host plat has been explored on optimal pattern for placement of piezoelectric work pieces around a hole in thin isotropic plate under static loading to reduce stress concentration. The piezoelectric actuators reduce directly or indirectly the stress concentration by applying positive and ...

[ 3 ] - بررسی تاثیر پارامترهای موثر بر الگوی قرارگیری بهینه عملگرهای پیزوالکتریک در کاهش تمرکز تنش با استفاده از الگوریتم پرندگان

در این مقاله به بررسی پارامترهای موثر بر الگوی بهینه قرارگیری عملگرهای پیزوالکتریک در اطراف یک سوراخ در یک صفحه تحت کشش به منظور کاهش تمرکز تنش پرداخته شده است. بدین منظور، یک نسبت سفتی که در آن پارامترهای موثر بر جایابی عملگرهای پیزوالکتریک در اطراف سوراخ نشان داده ارائه شده است. در این نسبت سفتی، چهار پارامتر مدول الاستیسیته، ضخامت ورق، ضخامت پیزوالکتریکها و ولتاژ اعمالی به عملگرهای پیزوالکت...

[ 4 ] - A Heuristic Approach for Optimization of Gearbox Dimension

A powerful optimization method is proposed in this study for the minimal dimensional design problem of gearbox. It is a general model that is suitable to use for any series of gear drives system and can extract both dimensional and layout of components-limited optimization design together. The objective function in this study has many local extremes so for avoiding this situation, various const...

[ 5 ] - A Heuristic Approach for Optimization of Gearbox Dimension

A powerful optimization method is proposed in this study for the minimal dimensional design problem of gearbox. It is a general model that is suitable to use for any series of gear drives system and can extract both dimensional and layout of components-limited optimization design together. The objective function in this study has many local extremes so for avoiding this situation, various const...

[ 6 ] - Numerical/Experimental Analysis of the Deformation of Tubes under Concentrated Load

Distortion and deformation of tubes during machining operations are very important. In this study, a tube used in magnetic drum separator under concentrated load (machining load) is considered. Using finite element simulation, deformities and their dependence on parameters such as the thickness of the tube and the place of concentrated force are observed and predicted. To compare and confirm th...

[ 7 ] - 3D Optimization of Gear Train Layout Using Particle Swarm Optimization Algorithm

Optimization of the volume/weight in the gear train is of great importance for industries and researchers. In this paper, using the particle swarm optimization algorithm, a general gear train is optimized. The main idea is to optimize the volume/weight of the gearbox in 3 directions. To this end, the optimization process based on the PSO algorithm occurs along the height, length, and width of t...